A medium Mn steel has been designed to achieve an excellent combination of strength and ductility based on the TRIP (Transformation Induced Plasticity) concept for automotive applications. Following six passes of hot rolling at 850 °C, the Fe-7.9Mn-0.14Si-0.05Al-0.07C (wt.%) steel was warm-rolled at 630 °C for seven passes and subsequently air cooled to room temperature. The sample was subseque...

Magnesium alloys have recently attracted great interest due their lightweight and high specific strength. However, because of their hexagonal close-packed structure, they have few active slip systems, resulting in poor ductility and high mechanical anisotropy at room temperature. In the present work, we used a cross-shear deformation imposed by a differential speed rolling (DSR) technique to im...

Three different aluminum–iron alloys were produced by electron-beam deposition with the iron content in the range 1.15–1.71 at.%. These alloys did not contain any identifiable iron-bearing particles, and exhibited full density with high-angle grain boundaries in the micrometer range, and a sub-grain size typically smaller than 100 nm. The tensile deformation characteristics of the alloys were e...

Since the earthquakes in Northridge and Kobe in 1994 and 1995, respectively, many investigations have been carried out towards improving the strength and ductility of steel beam to column pre- and post-Northridge connections. In order to achieve these objectives, recent researches are mainly focused on three principles: reducing the beam section to improve the beam ductility, adding different k...

Chitosan is an important biomaterial used widely in medical applications. One of the key concerns about its use is the fragile nature of chitosan films. By comparing the component molecular interactions using FTIR, this study attempts to understand how the ductility of chitosan can be improved by blending and copolymerizing with poly(ethylene glycol) (PEG). An improvement in ductility was obtai...

We present a comprehensive computational analysis of the deformation of ultrafine crystalline pure Cu with nanoscale growth twins. This physically motivated model benefits from our experimental studies of the effects of the density of coherent nanotwins on the plastic deformation characteristics of Cu, and from post-deformation transmission electron microscopy investigations of dislocation stru...

In this paper, the inelastic damage process in Engineered Cementitious Composites (ECC) in the high stress concentration zone adjacent to the head of an embedded anchor under tensile load was examined experimentally and numerically. An FEM model together with a tensile strain-hardening material model of ECC was developed to simulate the damage process leading to final failure. Experimental obse...

this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...

the present research is concerned with the determination of ductility, over-strength and response modification factors of coupled steel shear wall frames. three structural models with various numbers of stories, bay width and coupling beam height were analyzed using static pushover and incremental nonlinear dynamic analyses. the ductility, over-strength and response modification factors for the...

Using a uniaxial localization model, it is shown that parallel elasticrcstf!1int increases ductility, while an increase in support flexibility or length ofspecimen reduces ductility. Statistical macroscopic nonhomogeneity of the specimen ismodeled by a system of uniaxial parallel elements of random properties following thenormal distribution. The stability analysis and Monte Car...