Cross-linked metal-imprinted chitosan microparticles were prepared from chitosan, using four metals (Cu(II), Zn(II), Ni(II), and Pb(II)) as templates, and epichlorohydrin as the cross-linker. The microparticles were characterized by Fourier transform infrared spectroscopy, solid state (13)C nuclear magnetic resonance spectroscopy, and energy-dispersive X-ray spectroscopy. They were used for com...

Biosorption characteristics of Pb(II) ions from aqueous solution were studied using some residues of solvent-extracted Otostegia persica known as goldar residue biomass. The effects of contact time (0–120 min), the initial pH 3–8, biomass dosage (0.53–2.6 g/L) and the initial lead concentration (5–25 mg/L) on biosorption were investigated. The maximum adsorption capacity of 17.3 mg/g at pH 5.5,...

Rice husk ash (RHA), an agricultural waste, was used as biosorbent for the removal of Iron(II) and Manganese(II) ions from aqueous solutions. The structural and morphological characteristics of RHA and its elemental compositions before and after adsorption of Fe(II) and Mn(II) were determined by scanning electron microscopic (SEM) and X-ray fluorescence (XRF) analyses. Batch experiments were ca...

The characteristics of arsenic adsorption onto Fe-XAD8-DEHPA resin were studied on the laboratory scale using aqueous solutions and natural underground waters. Amberlite XAD8 resin was impregnated with di(2-ethylhexyl) phosphoric acid (DEHPA) via the dry method of impregnation. Fe(III) ions were loaded onto the impregnated resin by exploiting the high affinity of arsenic towards iron. The studi...

The aim of this study was to observe the effects of alkaline activating agents on the characteristics, composition, and surface morphology of the designed activated carbons. Activated carbons were prepared by pyrolysis of Acacia mangium wood in the presence of two basic activating agents (calcium oxide and potassium hydroxide). The extent of impregnation ratio of precursor to activating agents ...

The paper presents the use of Pyrolox™ containing manganese nano oxides used for the removal of Cu(II), Zn(II), Cd(II), and Pb(II) as well as U(VI) ions. Their concentrations were analyzed using the atomic absorption spectrometer SpectrAA 240 FS (Varian) as well as UV-vis method. For this purpose the static kinetic and equilibrium studies were carried out using the batch technique. The effect o...

Unmodified montmorillonite clay was utilized as a low cost adsorbent for the removal of heavy metals from a contaminated automobile effluent. Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy were used to characterize the adsorbent. Batch sorption experiments were performed at an optimum effluent pH of 6.5, adsorbent dose of 0.1 g, particle size of 100 ...

Green coconut fiber (Cocos nucifera L.) has been largely used in solid-phase extraction. The effect of the initial dye concentration (1.91, 3.02 and 4.02) × 10−5 mol∙L−1 and solid phase contact (SPE) time were evaluated at different temperatures (283, 298 and 313) K at pH 2. Kinetic experimental data were applied to three simplified kinetic models: pseudo-first order, pseudo-second order, and i...

The presence of arsenic in drinking water is one of the greatest threats to public health. The aim of this experimental investigation was to study the removal efficiency of As(v) from water by application of iron-impregnated activated carbon(Fe-AC). Coating of activated carbon with iron salt was carried out by impregnation method and thermochemical reactions with using of 100 mM FeCl3 solution....

Adsorption is considered a cost-effective procedure, safer to handle with high removal efficiency. Activated alumina is the most commonly used adsorbent for the removal of arsenic from aqueous solutions. However, activated alumina has a low adsorption capacity and acts kinetically in a slow manner. An ideal adsorbent should have a high surface area, physical and/or chemical stability and be ine...