Pulses as short as 460 fs and a tuning range as wide as 200 nm around 1 microm have been achieved from a photonic-crystal-fiber-based parametric oscillator. The ring cavity with only 65 cm of photonic crystal fiber is synchronously pumped with a tunable passively mode-locked Yb-doped fiber laser. Widely extended tunability is achieved by using the modulation instability gain in normal dispersio...

Fibers’ splicing is one of the essential and critical procedures for fiber optics and photonics devices, modules and networks. The purpose of this paper is to present a recommended apparatus which allows reducing the frequency to clean the electrodes of the fusion – splicer equipment when Corning’s erbium doped fibers are spliced together or to other type of all-silica fibers. Also, this recomm...

A nonlinear amplifying loop mirror constructed from erbium-doped fiber is proposed for simultaneous amplification and compression of ultrashort fundamental solitons. Numerical simulations show that, unlike conventional erbium-doped fiber amplifiers in which nonlinear effects lead to serious degradation of pulse quality, the proposed device performs efficient high-quality amplification and compr...

We introduce a fiber ring optical resonator based on adiabatic fused-fiber grating couplers. The coupling of a through fiber to the resonator is controlled by the strength of the fiber Bragg gratings. By using two of these couplers and incorporating erbium-doped (ED) fiber in the ring, we control the internal loss of the ring by pumping the ED fiber. The transmission spectra of the through port...

We report on the demonstration of an all-fiber femtosecond erbium doped fiber laser passively mode-locked using a 45º tilted fiber grating as an in-fiber polarizer in the laser cavity. The laser generates 600 fs pulses with output pulse energies ~1 nJ. Since the 45° tilted grating has a broad polarization response, the laser output has shown a tunabilty in wavelength from 1548 nm to 1562 nm by ...

This paper describes a proposal and successful demonstration of a dual wavelength all-fiber passively Q-switched erbium-doped fiber ring laser. The Q-switch operation was realized by using a nonlinear loop mirror that incorporated an unbalanced dispersion-decreasing taper fiber to act as a saturable absorber without additional elements. This setup enabled a fiber ring laser to achieve a perform...

We present a new method of measuring the guided, radiated, and total decay rates in uniform waveguides. It is also shown theoretically that large modifications of the total decay rate can be achieved in realistic erbium-doped fiber amplifiers and erbium-doped waveguide amplifiers with effective mode area radii smaller than approximately 1 microm.

Photocatalyst arrays of a number of metal oxides were prepared by dispensing metal precursor solutions onto fluorine-doped tin oxide-coated glass followed by annealing at 500 °C for 3 h. These were screened by scanning electrochemical microscopy with a scanning optical fiber, and the results showed that all Sn-doped Cd-In-Bi, Zn-In, and W-Cd oxide photocatalysts produced enhanced photocurrents ...

This paper presents a study of multi-core erbium doped couplers as an alternative to conventional erbium-doped fiber amplifiers. The couplers can reduce the power unbalance between WDM channels along an optical communication link. Different configurations of couplers are analyzed and the influence of the number of cores is studied.