Consider a square n× n array of lights (see Figure 5.1). There is one switch corresponding to each row and each column (i.e., 2n switches). Throwing a switch changes the state of all the lights in the corresponding row or column. We now consider the problem of setting the switches so as to maximize the number of lights that are on, starting from an arbitrary initial on/off configuration of the ...

15. Supplementary Notes Project performed in cooperation with the Texas Department of Transportation and the Federal Highway Administration. 16. Abstract Curing has substantial effects on the long-term performance of Portland cement concrete (PCC) pavement. TxDOT requires two applications of curing compounds, with a maximum 180 sf/gal per each application. However, no compliance testing is cond...

AIM The aim of this study was to evaluate the heat generation of three different types of light curing units. METHODS AND MATERIALS Temperature increases were recorded from a distance of 1 mm from a thermocouple to the tip of three different types of light curing units including one quartz-tungsten halogen (QTH), one plasma arc (PAC), and one light emitting diode (LED) unit. An experimental m...

In modern research, development of monomers that reduce shrinkage of composite materials remains an ongoing quest and perennial challenge. The purpose of this study, therefore, was to analyze the shrinkage behaviour of an innovative composite material for dental restorations based on a monomer with a new chemical formulation, known as silorane. To this end, shrinkage stress development during c...

Aim The aim of this study is to evaluate and to compare the effect of different light-curing modes and different liners on cuspal deflection in premolar teeth restored with bulk filled or incrementally filled composite measured at different time intervals. Materials and Methods The study was divided into two parts (Part 1-different curing modes, Part 2-different liner) each with sixty extract...

This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the compressive strength of self-compacting geopolymer concrete prepared by using fly ash as base material and combination of sodium hydroxide and sodium silicate as alkaline activator. The experiments were conducted by varying the curing time and curing temperature in the range of...