Cracks are dangerous and frequently observed defects in steel structures. Therefore, the understanding of the mechanism of crack is very important to structure safety. Although the mechanism of static crack has been widely studied by researchers, the mechanism of dynamic crack has been left out and seldom been discussed. In this paper, a modeling method for acoustic emission (AE) source of dyna...

Despite decades of study, the atomic-scale mechanisms of fatigue crack growth remain elusive. Here we use the coupled atomistic–discrete dislocation method, a multiscale simulation method, to examine the influence of dislocation glide resistance on near-threshold fatigue crack growth in an aluminum alloy. The simulations indicate that the threshold increases with an increase in dislocation glid...

Crack: The tests were performed using Crack version 1.0 beta 18. Crack is a description logic system with both TBox and ABox, using the logic ALCRIFO. Crack reasoning procedures are based on a sound and complete tableaux algorithm 1].

Mixed-mode dynamic crack growth behavior in a compositionally graded particle filled polymer is studied experimentally and computationally. Beams with single edge cracks initially aligned in the direction of the compositional gradient and subjected to one-point eccentric impact loading are examined. Optical interferometry along with high-speed photography is used to measure surface deformations...

We use computer simulations to study the behavior of sharp and blunted cracks in various f.c.c. metals. We find that in models representing platinum and gold a sharp crack is stable with respect to the emission of a dislocation from the crack tip, whereas for all other metals studied the sharp crack is unstable. This result cannot be explained by existing criteria for the intrinsic ductile/brit...

Precracked and notched specimens were used to investigate the fracture mechanism of a bainite steel at low temperature. The critical fracture event was studied using metallographic sectioning method. The results showed that the critical cleavage event was different in the precracked and the notched specimens. At -196C, all specimens fractured at lower-shelf region without any ductile crack grow...

Lithium-ion batteries have become a widely-used commodity for satisfying the world’s mobile power needs. However, the mechanical degradation of lithium-ion batteries initiated by micro cracks is considered to be a bottleneck for advancing the current technology. This study utilizes a finite element method-based virtual crack closure technique to obtain particleand crack-sizedependent estimates ...

A reliable and cost effective two-phase methodology is proposed to predict crack propagation in generic two-dimensional structural components under complex fatigue loading. First, the fatigue crack path and its stress intensity factors are calculated in a specialized finite element software, using small crack increments. At each crack propagation step, the mesh is automatically redefined based ...

A detailed model of the role of asperities in crack closure has been initiated in Part 1 of this article. Crack opening stress is defined as the far-field stress required to overcome the asperity-induced contact stresses along the crack. In this Part 2, the magnitude of crack opening stress is established as a function of roughness (s0); asperity density (N); maximum stress level (Smax/Sy); sha...

using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. in the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...