A common feature shared by all pyrometallurgical smelting processes is the production of slag. Slag is usually a byproduct of metal production, although there are processes (such as ilmenite smelting, for example) where the slag is the principal product. Most slags contain a significant amount of heavy metals, the release of which can cause environmental problems. However, the recovery of these...

This study aims to investigate the activating effect of Na2CO3 and NaOH on the workability and mechanic strength of slag-based alkali activated materials with different alkali contents and water to binder ratios. The heat release during the reaction process of slag activated with sodium carbonate and sodium hydroxide were monitored respectively to analyze the hydration process. Meanwhile, the w...

Microwave technique were used to investigate the early hydration of slag cement with different slag percentages, different activators and different amount of activator. It is found that higher slag cement causes a higher dielectric constant E and a shorter induction period. But higher slag cement samples have very different electrical conductivity (3 compared with that of pure cement, their o c...

V. P. Karasyov, P. V. Kovalev, A. Z. Issagulov, V. Yu. Kulikov, Y. P. Chsherbakova. Saint-Petersburg State Polytechnic University, SaintPetersburg, Russia, Karaganda State Technical University, Karaganda, Kazakhstan There is considered the power operating mode of a high-power arc steelmaking furnaces (ASMF) in the period of the flat bath. It is revealed that electric energy is mainly spent for ...

One purpose of this article is to draw attention to the seminal work of J. Mealy in 1989 on calibrations in semi-riemannian geometry where split SLAG geometry was first introduced. The natural setting is provided by doing geometry with the complex numbers C replaced by the double numbers D, where i with i = −1 is replaced by τ with τ = 1. A rather surprising amount of complex geometry carries o...

Chromium pollution has been historically widespread throughout the world. Most available remediation technologies often require energy consumption. This study is aimed to develop electrochemical remediation for Cr(VI) in chromium-slag leakage with self-generated electricity. Dynamic leaching experiments of chromium-slag samples were conducted to survey the release and leaching behavior of Cr(VI...

Jihui Zhao 1,*, Dongmin Wang 2, Peiyu Yan 1 and Wenping Li 2 1 Institute of Building Materials, Department of Civil Engineering, Tsinghua University, Beijing 100084, China; [email protected] 2 School of Chemical & Environmental Engineering, China University of Mining & Technology, Beijing 100083, China; [email protected] (D.W.); [email protected] (W.L.) * Correspondence: zhaojihui324@...

Vanadium extraction methods were developed for iron-vanadium-phosphorus (FeV-P) melts derived from processing of V-bearing titanomagnetites and steel slags. Studies on phase relationships of V slags were carried out to provide important understanding of the extraction processes. Phase relationship in vanadiferous slag was investigated experimentally at 1573K, 1673K and 1773K, for the compositio...

The paper describes the application of calcium-containing industrial waste for ceramics production with anorthite formation in phase composition. ceramic mixture compositions are studied using amount 10–80 wt.% phase. physical and mechanical properties laboratory samples studied, their maximum strength being 43.4, 41.2 36.2 MPa gas treatment residue, blast furnace sludge converter slag, respect...

The use of steel-making slag as catalysts for microwave-assisted dry reforming of CH4 was studied. Carbon materials (an activated carbon and a metallurgical coke), mixtures of carbon materials + Fe-rich slag and mixtures of carbon materials + Ni/Al2O3 were tested as catalysts. Mixtures of slag with carbons gave rise to higher and steadier conversions than those achieved over carbon materials. T...