in this study, tio2 and zno nanofilms were prepared by sol-gel spin-coating method. nanofilms were characterized by x-ray diffraction (xrd), energy dispersive analysis of      x-ray (edx), scanning electron microscopy (sem) and field emission scanning electron microscopy (fe-esm). structural and morphological properties of nanofilms were investigated. the average crystalline size of tio2 and zn...

thin bonded films have many applications in antireflection and reflection coating, insulating and conducting films and semiconductor industries. thermal conductivity is one of the most important parameter for power packaging since the thermal resistance of the interconnections is directly related to the heat removal capability and thermal management of the power package. the defects in material...

Current methodologies used for the inference of thin film stress through curvature measurement are strictly restricted to stress and curvature states that are assumed to remain uniform over the entire film/substrate system. These methodologies have recently been extended to a single layer of thin film deposited on a substrate subjected to the non-uniform misfit strain in the thin film. Such met...

CdTe thin films with 2.8 µm thickness were deposited by electron beam evaporation method. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and atomic force microscopy (AFM) were used to characterize the films. The results of AFM analysis revealed that the CdTe films have uniform surface. CdTe thin films were heat-treated by SnCl2 solution. Structural analysis using XRD s...

the performances of two-phase polymer-liquid pebax®/polyethylene glycol (peg) and three-phase polymer-liquid-solid pebax®/peg/mwnt thin film composite membranes for co2 and ch4 permeation were studied. the effect of temperature and mwnt/pebax® ratio on single gas (co2 and ch4) permeability was investigated. the permeation of both gases was measured at different temperatures from 303 to 323 ˚k. ...

This study presents the fabrication process and display characteristics of a flexible organic polymer display device that consists of a thin substrate of Polyether Sulfone, a multilayer serpentine-type microheater array that is fabricated on the substrate, and a UV-sensitive polydiacetylene (PDA)-polyvinyl alcohol (PVA) composite film. A retention time of one second is achieved with cell sizes ...

We recently reported on a Transition Edge Sensor (TES) composite bolometer for Fourier Transform spectroscopy which was designed, built and characterized. The design is based on a superconducting thermistor with SQUID readout, SiN membrane technology and a thin film metal mesh absorber which is optimized for the spectral range from 0.1 THz to 3 THz. A noise equivalent power (NEP) of 3.8×10-13 W...

A thin diamond-like carbon (DLC) film was deposited onto a densely packed "forest" of vertically aligned multiwalled carbon nanotubes (VACNT). DLC deposition caused the tips of the CNTs to clump together to form a microstructured surface. Field-emission tests of this new composite material show the typical low threshold voltages for carbon nanotube structures (2 V μm(-1)) but with greatly incre...

co-fe films were electrodeposited on cu substrate from electrolytes with different co concentration  levels. x-ray diffraction (xrd) was used  to  investigate  the  films  crystal  structures. the  results  indicate that  if  the  co  concentration  is  less  that  the  fe  concentration,  the cubic  structure  appears  in  the  films, while  the  hexagonal  structure dominates when  the co  co...