Most of the iron in the world is produced using a blast furnace process, which has iron ore (iron oxides) and coke as its raw materials. When pellets are used in a blast furnace, the iron burden material is charged in the form of pellets and fine, iron-rich by-products are charged typically in the form of cold-bonded briquettes at the top of the blast furnace. Coke is the primary fuel and reduc...

Nickel supported on SBA-15 doped with CeO2 catalysts (Ni-CeO2/SBA-15) was prepared, and used for steam reforming of toluene which was selected as a model compound of biomass gasification tar. A fixed-bed lab-scale set was designed and employed to evaluate the catalytic performances of the Ni-CeO2/SBA-15 catalysts. Experiments were performed to reveal the effects of several factors on the toluen...

A study was carried out into the use of preformation process to prepare biochar for replacing coke breeze in iron ore sintering. Two types of preformation process, thermo-compression process (TCP) and normal temperature process (NTP), were adopted. Results show that preformation contributed to improving the density of both raw biomass and biochar. Recommended preformation parameters for TCP wer...

The OSHA standard for coke oven emissions, which went into effect in January 1977, sets a permissible exposure limit to coke oven emissions of 150 micrograms/m3 benzene-soluble fraction of total particulate matter (BSFTPM). Review of the epidemiologic evidence for the standard indicates an excess relative risk for lung cancer as high as 16-fold in topside coke oven workers with 15 years of expo...

To investigate associations among occupational exposure to coke oven emissions (COEs), oxidative stress, cytogenotoxic effects, change in the metabolizing enzyme glutathione S-transferase (GST), and internal levels of polycyclic aromatic hydrocarbons (PAHs) in coke oven workers, we recruited 47 male coke oven workers and 31 male control subjects from a coke oven plant in northern China. We meas...

Selective catalytic oxidation (SCO) method is commonly used in wet denitration technology; NO after the catalytic oxidation can be removed with SO2 together by wet method. Among the SCO denitration catalysts, pyrolysis coke is favored by the advantages of low cost and high catalytic activity. In this paper, SCO method combined with pyrolysis coke catalyst was used to remove NO from flue gas. Th...

Competitive athletes completed two studies of 2-h steady-state (SS) cycling at 70% peak O(2) uptake followed by 7 kJ/kg time trial (TT) with carbohydrate (CHO) intake before (2 g/kg) and during (6% CHO drink) exercise. In Study A, 12 subjects received either 6 mg/kg caffeine 1 h preexercise (Precaf), 6 x 1 mg/kg caffeine every 20 min throughout SS (Durcaf), 2 x 5 ml/kg Coca-Cola between 100 and...

Lignin is the most difficult to be converted and most easy coking component in biomass catalytic pyrolysis to high-value liquid fuels and chemicals. Catalytic conversion of guaiacol as a lignin model compound was conducted in a fixed-bed reactor over ZSM-5 to investigate its conversion and coking behaviors. The effects of temperature, weight hourly space velocity (WHSV) and partial pressure on ...

In this study, effective and easily accessible cheap catalysts that assist converting heavy oil residue to lighter products with high yield are investigated. Hydrocracking experiments were carried out in a 10 ml stainless steel bomb-type reactor up down stirrer at 200 times of reciprocation per minute. The catalyst mixture provided the minimum coke was FeSO4.H2O, binary mixtures FeSO4.H2O metal...