A theoretical analysis is performed to study the flow and heat transfer characteristics of magnetohydrodynamic mixed convection flow of a micropolar fluid past a stretching surface with slip velocity at the surface and heat generation absorption . The transformed equations solved numerically using the Chebyshev spectral method. Numerical results for the velocity, the angular velocity, and the t...

To lower the friction coefficient and increase the wear resistance of epoxy, nanoparticles of zinc oxide and polytetrafluoroethylene (PTFE) were added in small volume percents to an epoxy matrix. Tribological testing of the samples in this study was completed on a linear reciprocating tribometer with a 250 N normal load and a 50.8 mm/s sliding speed. Several samples were made and tested followi...

Deep drawing process is one of the most applicable methods in producing industrial parts. In this process, the initial blank deforms to final product using a rigid punch and die. In this investigation, the effect of deep drawing process parameters of brass/steel laminated sheet composites on required forming force has been investigated. The process simulated using finite element method (FEM) an...

This article investigates the effect of contact ageing on fretting damage of an epoxy-based cathodic electro-deposited coating for use on automotive seat slide tracks (made of cold-rolled high strength steel). Static normal load was induced at the contact between the coating and an AISI52100 ball for a certain duration. It was identified that plastically deformed contact area increased logarith...

Sliding bearings with low coefficient of friction enable the base isolation system with longer natural period than previous ones and to be effective even for small to medium earthquakes. This paper introduces the sliding bearings with low coefficient of friction, which is almost under 0.03. It is shown that newly developed materials for the sliding bearings contribute to reduce coefficient of f...

Mechanical engineering often uses fluid lubrication to limit friction. Even in the presence of a lubricant, metallic contact between the sliding surfaces may readily occur. In running-in, the oil film thickness can be so thin that contact arises at the summit of asperities, thus, increasing both the friction coefficient and wear. Such regimes are the so-called mixed or boundary lubrication. In ...

accumulative roll bonding (arb) was used to fabricate the cu-zn multilayer and cu-zn solid solution. a lamellar structure with the hardness of about 130 vhn was formed after eight arb cycles. following to the suitable heat treatment, a solid solution with a uniform microstructure and hardness of about 57 vhn was produced. the dominant wear mechanism in the arb processed multilayer was found to ...