In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, ...

A computational approach to the optimization of fracture resistance of multiphase materials (here high speed steels) by varying their microstructure is presented. The main points of the optimization of steels are as folIows: (1) development and verification of the model: numerical simulation of crack initiation and growth in real microstructures of steels, (2) computational experiment: simulati...

This data analysis was undertaken to investigate the weatherability of steels whose compositions do not fall in the range of ASTM Standard G101, Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels (1). This standard was developed to estimate the corrosion resistance of low-alloy weathering steels from chemical composition data and from actual atmospheric exposure tests. This sta...

In this study, the hardness and wear behaviour of carburized and boronized AISI 8620 steels have been studied. The boronizing treatment increased the hardness of AISI 8620 steels from 395 HV0.1 to a maximal 1610 HV0.1 compared to the carburized steels and also significantly improved its wear behaviour. From obtained results, it can be concluded that boronizing is very effective surface hardenin...

The effect of ferrite grain size on the fatigue and tensile properties of dual phase steels with a 0.25 volume fraction of martensite (Vm) under different heat treatments was investigated. The heat treatments were homogenized at 1200 oC along with several subsequent normalizations at 910 oC, resulting in different microstructures and mechanical properties. After heat treatment, the obtained ste...

The metallic low and intermediate level radioactive waste generally consists of carbon steel and stainless steels. The corrosion rate of carbon steel in deep groundwater is typically low, unless the water is very acidic or microbial activity in the environment is high. Therefore, the assessment of microbially induced corrosion of carbon steel in deep bedrock environment has become important for...

Application of magnetic Barkhausen emission (MBE) analysis for assessment of microstructures and damage in various materials including carbon steel, Cr-Mo ferritic steels, 17-4 PH steel and metastable austenitic stainless steel has been highlighted in this paper. Thermally induced microstructural changes in Cr-Mo steels have been correlated with MBE, based on a two stage magnetization process m...

Nitrogen pressure during melting can be a basis for the most general classification of steels alloyed by nitrogen. are made under normal pressure, and high-nitrogen being higher atmospheric in special units. Nitrogen, as well carbon, strengthens increases thermal stability austenite. The smaller size nitrogen ion compared with carbon results nitrides, lower surface energy strengthening effect, ...

A method to image near-surface hardness profiles of heat-treated case-hardened steels using laser infrared photothermal radiometric phase imaging is described. It is shown that thermophysical and mechanical transverse inhomogeneity profiles in industrial case hardened steel samples are well correlated. Phase surface scanning imaging leads to a practical criterion for assessing transverse hardne...