/ 11 Abstract / 12 / 13 One prerequisite for plant functional genomic projects is the development of a high-throughput transformation platform. As the / 14 moss Physcomitrella patens can be transformed via PEG-mediated DNA-uptake into protoplasts, a semi-continuous bioreactor / 15 culture of this plant was optimised regarding protoplast isolation efficiencies. Under standard conditions protopla...

Objective To explore the process of refuse decomposition in hybrid bioreactor landfill. Methods The bioreactor landfill was operated in sequencing of facultative-anaerobic and aerobic conditions with leachate recirculation. pH, COD, and ammonia in the leachate and pH, biodegradable organic matter (BDM), and cation exchange capacity (CEC) in refuse were detected. Results CEC increased gradually ...

For a glucose-fed bio-hydrogen producing bioreactor, we have fitted the model parameters of a known model using experimental data obtained from a pilot laboratory-scale bioreactor. We use this fitted model to design an output-feedback controller based on the super-twisting algorithm, which uses only the on-line measurements of the hydrogen production rate and maximizes this variable by manipula...

Introduction Perfusion process involves retention of the cells inside the bioreactor while simultaneously removing spent medium and adding fresh medium continuously. The flow rate of addition of fresh and removal of spent medium are generally kept the same (perfusion rate) to maintain the culture volume inside the bioreactor. Cell retention is possible with many devices but the reliability and ...

In this review, horizontal tubular bioreactors are discussed regarding their advantages and disadvantages compared to other bioreactor types. In horizontal tubular bioreactors medium flow is characterized by plug flow conditions that can be favorable in the case of inhibition and/or repression bioprocess kinetics. For description of liquid flow simple one-parameter or complex multi-parameters m...

A laboratory study of the Cannibal process was undertaken to determine if the Cannibal system would generate less sludge compared with a conventional activated sludge system. Side-by-side sequencing batch reactors were operated--one using the Cannibal configuration and the other as conventional activated sludge. It was found that the Cannibal process generated 60% less solids than the conventio...

In this work the Computational Fluid Dynamics simulation of a stirred bioreactor purposely designed for the production of hydrogen from organic wastes fermentation is presented. The bioreactor is a vortex-ingesting, dual impeller, mechanically-agitated vessel equipped with a central draft tube. Due to the geometrical and physical complexity, the selected reactor offers a very challenging benchm...

Slowly biodegradable substances and recalcitrant pose a serious threat to the environment owing to their bio-resistant nature. With the increase in industrial activities, more and more quantity of these substances is being discharged through wastewater. The biodegradability potential of such substances can be anticipated from low BOD/COD ratio. Traditionally, the wastewater containing recalcitr...

A pilot scale membrane bioreactor hybrid system (MBR-HS) was evaluated for municipal wastewater treatment. This novel system comprised of a granular activated carbon-sponge fluidized bed bioreactor (GACS-FBBR) followed by a submerge membrane bioreactor (MBR) with the capacity of 2 L/min. The results indicated that the MBR-HS could effectively remove 90% DOC and 95% NH₄-N. PO₄-P removal efficien...

Streptomyces griseus was cultured in three different bioreactors in a medium containing chitin flakes. When a conventional bioreactor stirred by two sets of Rushton impellers and operated at high speed was used, the yield of streptomycin (3.1mg/l) was the highest observed and occurred at approximately 500 h. Cultivation of S. griseus in a bioreactor stirred at low speed by a U-shaped paddle res...