نتایج جستجو برای: anode material
تعداد نتایج: 373239 فیلتر نتایج به سال:
This article demonstrates the atomic layer deposition (ALD) of tungsten nitride using tungsten hexacarbonyl [W(CO)6] and ammonia [NH3] and its use as a lithium-ion battery anode. In situ quartz crystal microbalance (QCM), ellipsometry and X-ray reflectivity (XRR) measurements are carried out to confirm the self-limiting behaviour of the deposition. A saturated growth rate of ca. 0.35 Å per ALD ...
Structural, fibre reinforced, battery prototypes with two types of electrolyte matrix material, a gel and a solid polymer, have been manufactured. This was to confirm the concept of using carbon fibres as current collector in the anode as well as providing a mechanical load-carrying functionality. As a result, functioning batteries with gel electrolyte have been produced and their properties ha...
A tailored conversion-reaction anode material of 1-D MoS2 nanofibers with a vine-like shape composed of MoS2 nanoflakes delivers exceptionally high Na capacity and exhibits excellent rate properties. The improved cycleability of the MoS2 nanofiber electrode is achieved by a uniform TiO2 coating, which effectively minimized the sulfur dissolution.
A foam-like graphene material can be prepared by freeze drying and thermal reduction of graphene oxide suspensions. The graphene foam has a much higher capacity then conventional graphite anode, and it possesses better rate capability comparing with powderlike graphene active materials reported previously. The influence of the annealing temperature on the charge-discharge performance of graphen...
Hexagonal (h-WO3) mesocrystals with biconical morphology were prepared by a straightforward ionic liquid-assisted hydrothermal route and investigated as anodic materials for lithium-ion batteries. Compared to the alternatives, the biconical tungsten trioxide mesocrystal exhibited excellent lithium insertion with good cyclability and rate capability, making it a promising candidate as the anode ...
BaZr0.8Y0.2O3-∂ (BZY)-NiO composite powders with different BZY-NiO weight ratios were prepared by a combustion method as anodes for proton-conducting solid oxide fuel cells (SOFCs). After heating to 1100°C for 6 h, the composite powders were made of a well-dispersed mixture of two phases, BZY and NiO. Chemical stability tests showed that the BZY-NiO anodic powders had good stability against CO2...
The most commonly used solid oxide fuel cell (SOFC) anode material is a two phase nickel and yttria stabilized zirconia (Ni/YSZ) cermet. And the mechanical stability of anode support layer, in anode-supported electrolyte designs, is very important for large scale applications. During the assembly of stack and normal operation, the cermet anode should withstand enough mechanical loading to preve...
We report the electrochemical performance of a redox polymer-mediated glucose anode catalyzed by glucose oxidase and supported on a multiscale carbon material. The support is composed of carbon paper upon which is grown multiwall nanotubes by chemical vapor deposition combined with ohmic heating of the carbon paper. The material possessed 100-fold higher surface area and demonstrated tenfold hi...
Mesoporous, 3-D, nanocrystalline Si has been synthesized via the magnesiothermic reduction of SiO particles at a peak temperature of only 500 °C in a scalable flow-through reactor setup. Such 3-D porous Si as an anode material exhibited high, reversible capacities (i.e., >900 mA h g(-1) after 160 charge-discharge cycles at 1000 mA g(-1)).
A SnO2/graphene nanocomposite was prepared via a facile solvothermal process using stannous octoate as a Sn source. The as-prepared SnO2/graphene nanocomposite exhibited excellent electrochemical behavior with a high reversible capacity, a long cycle life and a good rate capability when used as an anode material for lithium-ion batteries.
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید