The lack of new functional applications for metallic glasses hampers further development of these fascinating materials. In this letter, we report for the first time that the MgZn-based metallic glass powders have excellent functional ability in degrading azo dyes which are typical organic water pollutants. Their azo dye degradation efficiency is about 1000 times higher than that of commercial ...

Reactive sputtering was used to grow thin films of ScxGa1-xN with scandium concentrations of 20%70% on quartz substrates at temperatures of 300-675 K. X-ray diffraction (XRD) of the films showed either weak or no structure, suggesting the films are amorphous or microcrystalline. Optical absorption spectra were taken of each sample and the optical band gap was determined. The band gap varied lin...

Amorphous thin films of transition metal (TM)-metalloid and TM-rare earth (R) alloys have been prepared by sputtering and multiple-target, electron-beam vapor deposition. Application of these has been made in several technically important areas including continuously variable surface acoustic wave (SAW) delay lines or resonators and magneto-optic mirrors for biasing ringlaser-gyroscopes (RLG). ...

Based on the embedded-atom method, a constant-pressure, constant-temperature molecular dynamics technique is applied to obtain an atomic description of glass formation process in eutectic Cu40Ag60 alloy. By using radial distribution function and pair analysis methods, the structure and glass forming ability of this alloy is studied by quenching from the liquid at different cooling rates (1 £ 10...

Most Li-O2 batteries suffer from sluggish kinetics during oxygen evolution reactions (OERs). To overcome this drawback, we take the lesson from other catalysis researches that showed improved catalytic activities by employing metal alloy catalysts. Such research effort has led us to find Pt3Co nanoparticles as an effective OER catalyst in Li-O2 batteries. The superior catalytic activity was ref...

Domain imaging of soft magnetic materials by transmission electron microscopy (TEM) is difficult due to the potentially saturating field of the microscope’s objective lens. Energy filtered Lorentz microscopy provides a low field, high resolution domain imaging solution for soft magnetic materials. This technique was successfully applied to a soft magnetic nanocrystalline alloy to examine the do...

In two amorphous alloys ZrTiCuNiBe and ZrAlNiCu coherent neutron scattering has been measured over five decades in energy, including measurements in the metastable melt of a metallic alloy more than 80 K above Tg . In the vibrational spectra a pronounced ‘‘boson’’ peak is found: Even in crystallized samples the density of states exceeds the Debye v model, and in the amorphous state low-frequenc...

The amorphous-to-crystalline transition during thermal annealing of amorphous Al80Fe20 alloy powders prepared by ball milling was investigated by means of magnetothermal analysis and X-ray di€raction. Following structural relaxation and stress relief processes, a metastable phase precipitates during primary crystallization, and a mixture of intermetallic compound (h-Al13Fe4) and fcc Al is devel...

Charging/discharging behaviors of de-alloyed and anodic oxidized Ti-Ni-Si amorphous alloy ribbons were measured as a function of current between 10 pA and 100 mA, using galvanostatic charge/discharging method. In sharp contrast to conventional electric double layer capacitor (EDLC), discharging behaviors for voltage under constant currents of 1, 10 and 100 mA after 1.8 ks charging at 100 mA sho...

Understanding the coercivity mechanism has a substantial impact on developing novel permanent materials. However, the current coercivity mechanisms used widely in permanent alloys cannot explain well the amorphous phase produced hard magnetic behavior of Nd-based bulk amorphous alloys (BAAs). Here, we propose that the coercivity in as-cast Nd60Fe30Al10 alloy is from the combination of magnetic ...