Complex aluminium alloy components fabricated by powder metallurgy (P/M) offer the promise of a low cost and high strength-to-weight ratio, which meets the demands of the automotive sector. This paper describes the die compaction and sintering response of an atomised Al-6061 alloy powder containing Mg and Si produced by rapid solidification. A design of experiments is used involving three level...

This work aims to evaluate the efficiency of ultrasonic degassing when applied to the AlSi9Cu3 alloy when compared with other degassing techniques. The mechanism of aluminium degassing is discussed. A suitable ultrasonic degassing apparatus including a novel MMM (Multi-frequency Multimode Modulated) technology, able to supply up to 1.2 kW power under a frequency up to 25 kHz, was developed spec...

M. Szucki, D. Kalisz, J. Lelito, P. L. Żak, J. S. Suchy, K. W. Krajewski, AGH University of Science and Technology, Faculty of Foundry Engineering, Kraków, Poland The presented work focuses on solid particle interactions with the moving crystallization front during a solidification of the metal matrix composite. The current analyses were made for silicon carbide particles and ZnAl alloy with di...

Porosity is a major problem occurring in aluminium alloy casting. During the process of solidification, alloy would shrink and emit dissolving hydrogen causing porosity formation inside the solidified part which leads to mechanical properties degradation. This research aims to produce a formula to explain the resulting porosity with the initial chemical compositions and cooling rate. A mathemat...

In this investigation ‚the fracture toughness of A356 containing15%SiC composite was studied. Al/SiC composites have been considered because of their mechanical and erosion properties .Low fracture toughness in Al/SiC as compared with Aluminium alloys is one of its disadvantage. In this study at first A356 alloy was melted in a smelting electrical furnace then poured into the mould. A356-15% Si...

Metal matrix composites (MMCs) attract considerable attention as a result from its ability in providing a high strength, high modulus, high toughness, high impact properties, improving wear resistance and providing good corrosion resistance compared to unreinforced alloy. Aluminium Silicon (Al/Si) alloy MMC has been widely used in various industrial sectors such as in transportation, domestic e...

Friction welding is widely used in various industries. In friction welding, heat is generated by conversion of mechanical energy into thermal energy at the interface the work pieces during pin rotation under pressure. A three-dimensional thermo mechanical simulation of friction stir welding (FSW) processes is carried out for Aluminium Alloys of 6061and 7050 where the simulation results are comp...

Structures operating at high temperatures and exposed to aggressive gaseous media are made of low-alloy molybdenum TsM-10 of the system Mo-Al-B, TsM-6 of the system Mo-Zr-B and TsM-12 of the system Mo-Zr-Hf-B [1, 2]. Alloy TsM-10 is commercially pure molybdenum deoxidized by aluminium and boron. Alloy TsM-6 is alloyed with up to 0.2 wt. % zirconium and TsM-12, is alloyed with up to 0.03 wt. % z...