To improve the performance of polyvinyl chloride (PVC), composites incorporating polyvinyl chloride (PVC), attapulgite nanoparticles (ANPs), and microcrystalline cellulose (MCC) were successfully prepared. The composites had higher vicat softening temperatures (VSTs) and the MCC had a great influence on mechanical properties of the composites. When MCC was added from 0 to 5 per hundred parts of...

The orthogonal design method was used to determine the optimum conditions for modifying poplar fibers through a high temperature and pressurized steam treatment for the subsequent preparation of wood fiber/high-density polyethylene (HDPE) composites. The extreme difference, variance, and significance analyses were performed to reveal the effect of the modification parameters on the mechanical p...

Calcium phosphate (CaP)/polymer composites have been studied as an alternative graft material for the treatment of bone defects. In this study, lysine-triisocyanate-based polyurethane (PUR) composites were synthesized from both hydroxyapatite (HA) and β-tricalcium phosphate (TCP) to reduce the brittleness of CaP and increase the bioactivity of the polymer. The mechanical properties and in vitro...

In recent years, graphene and its derivatives have attracted much interest in various fields, including biomedical applications. In particular, increasing attention has been paid to the effects of reduced graphene oxide (rGO) on cellular behaviors. On the other hand, dicalcium phosphate (DCP) has been widely used in dental and pharmaceutical fields. In this study, DCP composites coated with rGO...

Interfacial compatibility plays a key role in the performances of natural fiber-reinforced composites. The measures commonly used to improve the interfacial compatibility focus more on the addition of various compatibilizers than on the structural modification of the natural fiber. In this paper, an attempt was made to enlarge the interfacial interaction areas of the recycled polyethylene (rPE)...

Metal Matrix composites (MMCs) are light weight, high-strength materials with potential application in areas such as automobile, aerospace, defence and other industries. MMCs are projected to significantly reduce the overall weight of the vehicle and aircraft while maintaining satisfactory structural strength. Micron and Nano-sized ceramic particle reinforced aluminum matrix composites fabricat...

The preparation and photocatalysis of TiO2–ZnS/fluoropolymer fiber composites were investigated. The fluoropolymer nanofiber mats with carboxyl groups were prepared by electrospinning, and then titanium and zinc ions were introduced onto the fiber surfaces by the coordinating of carboxyl of fluoropolymer in solution. The TiO2–ZnS composites with diameters 15 nm to 1 lm were immobilized on the s...

Original graphene oxide (GO) nanosheets were prepared using the Hummers method and found to easily aggregate in aqueous and cement composites. Using carboxymethyl chitosan (CCS) as a dispersant, few-layered GO nanosheets (1-2 layers) were obtained by forming CCS/GO intercalation composites. The testing results indicated that the few-layered GO nanosheets could uniformly spread, both in aqueous ...

the aim of this work is to evaluate the influence of fabrication methods on the com-pressive properties of sandwich composites using both experimental work and numerical simulations. two types of sandwich composites with e-glass/kevlar/polyester resin facings and end-grain balsa wood as core have been produced by vacuum infusion processing (vip) and hand-lay up (hl) method. compression tests on...

in this study, the strain rate effect on the bending properties of fiber reinforced composites for three types of polymer composites namely phenolic resin reinforced by woven basalt fibers, woven carbon fibers, and woven basalt/ woven carbon fibers at a total volume fraction of approximately 35% has been determined. flexural tests have been conducted at low range of strain rates included 0.03 m...