PURPOSE To evaluate the effects of surface treatments on shear bond strength (SBS) between microwave and conventionally sintered zirconia core/veneers. MATERIALS AND METHODS 96 disc shaped Noritake Alliance zirconia specimens were fabricated using YenaDent CAM unit and were divided in 2 groups with respect to microwave or conventional methods (n=48/group). Surface roughness (Ra) evaluation wa...

a hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (rsm). the synthesized zirconia samples were characterized through x-ray diffraction (xrd), scanning electron microscope (sem) and transmission electron microscopy (tem) analyses to identify mean nano...

Zirconium dioxide (zirconia) ceramics are currently used for fixed restorations as a framework material due to their mechanical and optical properties. This review article describes the current status of zirconia-based fixed restorations, including results of current in vitro studies and the clinical performance of these restorations. Adaptation of zirconia-based restorations fabricated with CA...

The adhesion of porcelain to zirconia is a key factor in the success of bilayered restorations. In this study, the efficacy of a novel experimental liner (EL) containing zirconia for improved bonding between zirconia and veneering porcelain was tested. Four ELs containing various concentrations (0, 3.0, 6.0, and 9.0 wt %) of zirconia were prepared. Testing determined the most effective EL (EL3 ...

objective: zirconia cores have limited light transmittance and data are scarce on light transmission through zirconia cores with and without the veneering ceramic.   methods: in this in vitro study, disc-shaped specimens (11.5 mm in diameter and 0.4 (0.05) mm in thickness) were fabricated of three types of zirconia namely mamut, heany and zirkonzahn (n=5). a disc-shaped specimen (11.5 mm in dia...

From the liquid state to room temperature, two successive solid-state phase transitions occur in pure zirconia. It is well-known that last one (tetragonal monoclinic) martensitic and induces large volume variations shear strains. Elastic inelastic behaviors of zirconia-based materials are strongly influenced by this transition associated strain fields it induces. Knowledge stress at crystal sca...

Diierent bounds on the conductivity of a composite material may improve on each other in diierent conductivity regimes. If so, the question arises of how to eeciently interpolate between the bounds. In this paper we show how to do an interpolation with a two-point Pad e approximation method. For bounds on two-component composites the interpolation method is shown to be, in a sense, the best pos...

There is interest in using zirconia for biomedical applications as ball heads for total hip prostheses. Two potential types are under discussion: partially stabilized zirconia (PSZ) and tetragonal zirconia polycrystals (TZP) materials. Because of its enhanced material properties, TZP stabilized with yttria is favourable. To eliminate high amounts of natural radioactive impurities, the precursor...

OBJECTIVES To evaluate the bonding of resin-cement to yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) via silica coating followed by silanization, and three one-bottle universal adhesives, with or without prior conditioning using a zirconia primer. METHODS Y-TZP specimens (n=160) were conditioned by tribochemical silica coating and silanization (CS), or alumina sandblasting with one...

PURPOSE The aim of the study was to evaluate the effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations. MATERIALS AND METHODS Three different types of disk-shaped zirconia coping specimens (Lava, Cercon, Zirkonzahn: ø10 mm × 0.4 mm) were fabricated and veneered with IPS e.max Press Ceram (shade A2), for total thicknesses of 1 and ...