There is interest in using zirconia for biomedical applications as ball heads for total hip prostheses. Two potential types are under discussion: partially stabilized zirconia (PSZ) and tetragonal zirconia polycrystals (TZP) materials. Because of its enhanced material properties, TZP stabilized with yttria is favourable. To eliminate high amounts of natural radioactive impurities, the precursor...

Vanadium dioxide (VO2) undergoes a metal–insulator phase transition at ∼70 °C and has attracted substantial interest for potential applications in electronics, including those neuromorphic computing. The vanadium–oxygen system rather complicated diagram, controlling the stoichiometry of thin films vanadium oxides is well-known challenge. We explore novel combination two methods VO2 film deposit...

A novel route to fabricate nano-fiber anode material for solid oxide fuel cells (SOFCs) is presented. Firstly, uniform nano-fibers of 8 mol % Yttria Stabilized Zirconia (8YSZ) were formed in an electrospinning process; then, these electrospun fibers were calcined at temperatures up to 1300 °C; and finally the ceramic 8YSZ nano-fibers were coated with nickel in an electroless plating process. Th...

objectives: masking ability of a restorative material plays a role in hiding colored substructures; however, the masking ability of zirconia ceramic (zrc) has not yet been clearly understood in zirconia-based restorations. this study evaluated the effect of three different core materials on masking ability of a zrc. materials and methods: ten zirconia disc samples, 0.5mm in thickness and 10mm i...

objectives : studies on the effect of coloring procedures on the bond strength of zirconia to resin cement are lacking in the literature. this study evaluated the effect of dipping of zirconia ceramic in different liquid color shades on the microtensile bond strength (mtbs) of zirconia ceramic to resin cement. materials and methods: this in vitro study was conducted on 100 microbar specimens di...

This paper describes the fabrication and investigation of morphologically stable model electrode structures with well-defined and sharp platinum/yttria-stabilized zirconia YSZ interfaces to study geometric effects at triple phase boundaries TPBs . A nanosphere patterning technique using monodispersed silica nanoparticles, which are applied to the YSZ surface by the Langmuir– Blodgett method, is...

Yttria-stabilized zirconia (YSZ) was implanted with 15 keV Fe or Ti ions up to a dose of 8 x 1016 at cm -2. The resulting "dopant" concentrations exceeded the concentrations corresponding to the equilibrium solid solubility of Fe2Oa or TiO2 in YSZ. During oxidation in air at 400 ° C, the Fe and Ti concentration in the outermost surface layer increased even further until a surface layer was form...

Yttria-stabilized zirconia (YSZ) thin films were deposited using direct current (reactive and metallic) radio frequency magnetron sputtering. The effect of the deposition technique annealing treatment on microstructure crystallinity was assessed. Using produced in this work, oxygen gas sensors built their performance under vacuum conditions evaluated. All exhibited a cubic crystalline structure...