Dimethyl ether (DME) is of great industrial interest due to its use as clean fuel for diesel engines or in combustion cells, as a precursor to other organic compounds, as well as a green aerosol propellant that can effectively replace chloro-fluoro-carbons. Conventionally, high purity DME is synthesized by dehydration of methanol produced from syngas, in a process involving a catalytic fixed-be...

The γ-Reθ-model, a two equation, correlation-based transition model using local variables, has been employed to predict the extension of the laminar regions on a stiff geometry of the common dolphin (delphinus delphis) moving in the Reynolds regime of 5.5 ·10 to 10. Mesh independence was gained for a domain resolution of approximately 30 million cells in an unstructured polyhedral mesh with a p...

In this article, we demonstrate a numerical 3-D chip, and studied the capillary dynamics inside the microchannel. We applied the level set method on the Navier-Stokes equation which incorporates the surface tension and two-phase flow characteristics. We analyzed the capillary dynamics near the junction of two microchannels. Such a highlighting point is important that it not only can provide the...

Faraday surface instability measurements of the critical acceleration, a(c), and wave number, k(c), for standing surface waves on a tetracosanol (C24H50) melt exhibit abrupt changes at T(s)=54 degrees C, approximately 4 degrees C above the bulk freezing temperature. The measured variations of a(c) and k(c) vs temperature and driving frequency are accounted for quantitatively by a hydrodynamic m...

A new modelling approach to the description of mass and heat transfer in columns equipped with structured packings is developed based on rigorous equations of continuum mechanics. This approach rests on the analogy between the flow patterns in real structured packings and film flow. The physical model is based on a simplified geometrical representation of the packing. It consists of a bundle of...

This paper presents a new model for predicting the compressive strength of steel-confined concrete on circular concrete filled steel tube (CCFST) stub columns under axial loading condition based on Artificial Neural Networks (ANNs) by using a large wide of experimental investigations. The input parameters were selected based on past studies such as outer diameter of column, compressive strength...

Internal pipeline corrosion in oil production and transportation is always associated with the presence of water, and the likelihood of corrosion generally increases with the volume fraction of water. When the walls of the pipeline are wetted with oil no corrosion is possible. Highly turbulent flow was associated with negligible corrosion due to water entrainment by the flowing oil, whereas low...