In this work, wear behavior and microstructural characterization of porous layers produced in glass-ceramic substrates by pulsed laser irradiation in the nanosecond range are studied under unidirectional sliding conditions against AISI316 and corundum counterbodies. Depending on the optical configuration of the laser beam and on the working parameters, the local temperature and pressure applied...

In this study the friction, wear and surface mechanical behavior of medical-grade ultra-high molecular weight polyethylene (UHMWPE) (GUR 1050 resin) were evaluated as a function of polymer crystallinity. Crystallinity was controlled by heating UHMWPE to a temperature above its melting point and varying the hold time and cooling rates. The degree of crystallinity of the samples was evaluated usi...

The effect of T6 heat treatment on the microstructure and wear behavior of Al-332 piston alloy containing 1.2wt% iron was investigated. The results showed that the T6 heat treatment changed the morphology of acicular eutectic Si particles to a more spherical form. The heat treatment also reduced the average length and blunted the needle-like ?- phase intermetallics through dissolution and fragm...

AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...

    Condition Monitoring,   Oil Analysis, Wear Behavior,   Fuzzy Rule Based System   Maintenance , as a support function, plays an important role in manufacturing companies and operational organizations. In this paper, fuzzy rules used to interpret linguistic variables for determination of priorities. Using this approach, such verbal expressions, which cannot be explicitly analyzed or statistic...

In this study, four different alloys of steel blocks with a thickness 15mm were manufactured in order to develop an alternative plates used wear exposed areas construction machines, trucks, and asphalt production plants. To further increase the resistance blocks, their was reduced 10mm by hot-rolling method. Wear specimens obtained from rolled blocks. These abraded at 20N, 40N, 60N loads recipr...

Metal matrix nano composite coatings possess enhanced properties such as corrosion and wear resistance. This paper aims to study the corrosion behavior of pure Co and Co-BN nano composite coatings deposited with different particles concentration (5-20 g L-1) on copper substrates using electroplating technique. Morphology and elemental compositions of the coatings were investigated by means of s...