his investigation was carried out to reveal the impact of solar radiation on wind flow structure and pollutant dispersion in an urban street canyon of aspect ratio of one using the computational fluid dynamic (cfd) technique. the simulation results (velocity and concentration data) show that heating from building wall surfaces and ground lead to strong buoyancy forces as the air is heated by th...

We use the method developed by Elnahhas and Johnson [“On enhancement of boundary layer skin friction turbulence: An angular momentum approach,” J. Fluid Mech. 940, A36 (2022)] Xu et al. [“Decomposition skin-friction coefficient compressible layers,” Phys. Fluids 35, 035107 (2023)] for decomposition to integrate mean temperature equation high-Reynolds-number layers arrive at an identity wall-hea...

The Galerkin weighted residuals method is extended solve the laminar, fully developed flow and heat transfer of Al2O3-water nanofluid inside polygonal ducts with round corners for the constant heat flux and uniform wall temperature boundary conditions. Using the method, semi-analytical, closed-form solutions are obtained for the friction coefficient and the Nusselt number in terms of the radius...

It is found in many film-cooling experiments and computational analyses that a heated surface is employed to simulate the actual film-cooling condition with a cooling jet and a hot main flow. Considering that the dominant energy passage in turbine airfoil film cooling is always from the hot combustion gas flowing into the airfoil, employing a heated surface to simulate the actual film cooling c...

DIII-D, ELMing H-mode radiating mantle discharges have been obtained with electron density near the Greenwald density limit and a large fraction of the input power radiated inside the last closed flux surface, significantly reducing peak divertor heat fluxes. In these puff and pump discharges, the introduction of argon reduces particle flux to divertor tiles by a factor of 4 while peak heat flu...

In this study the performances of various non-circular microchannel heat sinks (normalized with circular shape) have been comparatively analyzed for CuO-water nanofluid and baseline pure water flow. Nusselt number and Poiseuille number for each microchannel and thermo-physical properties of CuO-water nanofluid (viz., thermal conductivity, viscosity, specific heat and density) have been designed...

laminar mixed convection of aluminium oxide (al2o3)–water nanofluid flow in an inclined annulus using a single-phase approach was numerically studied. constant heat flux boundary conditions were applied on the inner and outer walls. all the thermophysical properties of nanofluid, such as, viscosity, heat capacity, thermal conductivity, and thermal expansion coefficient, except density in the bo...

Experiments are performed to assess the feasibility of cooling high flux heat sources flush mounted on the inner wall of a cylindrical vessel by a dielectric liquid flowing at high velocity parallel to the vessel wall. Fluid motion is induced by rotating a stirrer having radial blades about the axis of the vessel. The study focusses on examining critical heat flux (CHF) enhancement attributed t...