Numerical simulations of the gas-liquid bubbly flow in a bubble column were conducted with the commercial CFD package CFX-4.4 to investigate the performance of three models (Pfleger and Becker, 2001; Sato and Sekoguchi, 1975; Troshko and Hassan, 2001) to account for the bubble-induced turbulence in the k-ε model. Furthermore, the effect of two different interfacial closure models was investigat...

Vegetation growing on the surface of a streambank has been shown to alter the shear stresses applied to the boundary, but basic questions remain regarding the influence of vegetation and streambank configurations on near-bank hydraulics. In the present study, Froudescaled flume experiments were used to investigate how changes in vegetation density (ratio of frontal area to channel area, includi...

the aerodynamics of road vehicles has frequently been studied in simplified geometries to separate the effect of various components on aerodynamic drag and on near wake flow dynamics. in this work, the characteristics of the near wake of a notch-back car model were investigated, using hot-wire anemometer. the main objectives of this study are to gain a better understanding of the flow structure...

A = constant b = vortex spacing C = constant to adjust turbulent spreading q = rms turbulence velocity R = mean radius T = parameter for vortex age t = time u = axial velocity v = lateral velocity w = descent speed y = spanwise coordinate, positive for port vortex z = vertical coordinate, positive pointing upwards = circulation = eddy dissipation rate = standard deviation = (effective) kinemati...

A so-called six-beam method is proposed to measure atmospheric turbulence using a ground-based wind lidar. This method requires measurement of the radial velocity variances at five equally spaced azimuth angles on the base of a scanning cone and one measurement at the centre of the scanning circle, i.e.using a vertical beam at the same height. The scanning configuration is optimized to minimize...

Non-equilibrium turbulence considerations from rapid distortion theory have been utilized to derive a correction to the turbulence dissipation rate, which then has been implemented in combination with the RNG k-epsilon model in a KIVA-based code. This correction reflects the time delay between changes in the turbulent kinetic energy due to changes in the mean flow and its turbulence dissipation...

A new model for the low-to-high (L-H) confinement transition has been developed based on a new paradigm for turbulence suppression by velocity shear [G. M. Staebler et al., Phys. Rev. Lett. 110, 055003 (2013)]. The model indicates that the L-H transition can be mediated by a shift in the radial wave number spectrum of turbulence, as evidenced here, for the first time, by the direct observation ...

The noise generated by the interaction of a turbulent inflow with the leading edge of a flat plate or an airfoil is a dominant sound source, for example in rotor-stator configurations of fans and air condition units. Aeroacoustic research of this noise source often includes performing wind tunnel experiments, where the required incident turbulence is generated by passive grids or meshes. In cer...

Roughness elements or turbulence promoters have been widely used to enhance heat transfer in cooling passages of modern gas turbine blades. Although such ribs substantially enhance heat transfer, the heat transfer coefficient is reduced immediately at corner downstream of each rib, creating hot spots. To remove such hot spots some of the ribs can be detached from the channel walls. In this pape...

Article history: Available online 30 October 2010