Pangolin scales form a durable armor whose hierarchical structure offers an avenue towards high performance bio-inspired materials design. In this study, the fracture resistance of African pangolin scales is examined using single edge crack three-point bend fracture testing in order to understand toughening mechanisms arising from the structures of natural mammalian armors. In these mechanical ...

Hardfacing alloys are weld deposited to provide a wear resistant surface for stmctural base materials. Commercial low cobalt hardfacing alloys are being evaluated to reduce plant activation levels. Since hardfacing alloys typically must be resistant to cracking to assure adequate in service performance, fracture toughness is a ~ critical material property. Fracture toughness (KJ measurements of...

The fracture resistance (R-curve behaviour) of two commercial dental composites (Filtek Z350(®) and Concept Advanced(®)) were studied using Double Cantilever Beam sandwich specimens loaded with pure bending moments to obtain stable crack growth. The experiments were conducted in an environmental scanning electron microscope to (a) accurately measure the applied energy-release rate for crack ini...

The toughening of an aromatic amine-cured diglycidyl ether of bisphenoI-A epoxy with particles of crystalline polymers was studied. The crystalline polymers were poly(butylene terephthalate), nylon 6, and poly(vinylidene fluoride). Nylon 6 and poly(vinylidene fluoride) were found to toughen the epoxy about as well as did an equivalent amount of CTBN rubber. Poly(butylene terephthalate) was foun...

In previous studies, enamel showed indications to occlude small cracks in-vivo and exhibited R-curve behaviors for bigger cracks ex-vivo. This study quantifies the crack tip's toughness (K(I0),K(III0)), the crack's closure stress and the cohesive zone size at the crack tip of enamel and investigates the toughening mechanisms near the crack tip down to the length scale of a single enamel crystal...

Interfacial fracture toughness and cyclic fatigue-crack growth properties of joints made from 99.5% pure alumina partially transient liquid-phase bonded using copper/niobium/copper interlayers have been investigated at both room and elevated temperatures, and assessed in terms of interfacial chemistry and microstructure. The mean interfacial fracture toughness, Gc, was found to decrease from 39...

The present study is devoted to the problem of enhancing fracture toughness of ZrO2 ceramic materials through the formation of composite structure by addition of Al2O3 and NiO particles. In this paper, we analyzed the general and distinguished features of microstructure of both composite materials and its effect on fracture toughness of materials. In this paper, we used the XRD, SEM, and EDS me...

Inspired by the layered aragonite platelet/nanofibrillar chitin/protein ternary structure and integration of extraordinary strength and toughness of natural nacre, artificial nacre based on clay platelet/nanofibrillar cellulose/poly(vinyl alcohol) is constructed through an evaporation-induced self-assembly technique. The synergistic toughening effect from clay platelets and nanofibrillar cellul...

Microencapsulated dicyclopentadiene (DCPD) healing agent and Grubbs’ Ru catalyst are incorporated into an epoxy matrix to produce a polymer composite capable of self-healing. The fracture toughness and healing efficiency of this composite are measured using a tapered double-cantilever beam (TDCB) specimen. Both the virgin and healed fracture toughness depend strongly on the size and concentrati...