Some physico-chemical properties and the concentrations of the metals Fe, Mn, Ni, Cd, Cr, Co, Cu, Pb, and Zn in water and sediments were examined from September 2011 to January 2012 in Bodo Creek, where oil spills have been recurrent. Temperature, pH, total dissolved solid, conductivity, salinity, dissolved oxygen, biological oxygen demand (BOD), chemical oxygen demand (COD), total hardness, su...

Nanoindentation measurements were obtained on eight commercially-produced DP980 dual-phase steels to quantify the hardness of the individual constituents, ferrite and martensite, in each steel. Each microstructure was also evaluated to determine grain size, martensite volume fraction (MVF), and retained austenite content. Nanoindentation hardnesses and quantitative microstructural measurements ...

The surface water chemistry of Thiruvananthapuram Museum Lake was carried out in the period of February 2013 to January 2014. Correlation study of the parameters and overall CCME WQI (Canadian Council of Ministers of the Environment Water quality Index) was also prepared in the study for the lake water. The parameters analysed are cations such as Ca2+, Na+, Mg2+ and K+ and the anions like PO4-,...

The surface water chemistry of Thiruvananthapuram Museum Lake was carried out in the period of February 2013 to January 2014. Correlation study of the parameters and overall CCME WQI (Canadian Council of Ministers of the Environment Water quality Index) was also prepared in the study for the lake water. The parameters analysed are cations such as Ca2+, Na+, Mg2+ and K+ and the anions like PO4-,...

Chromium oxide coatings are chemically inert, have high mechanical strength, hardness and good optical characteristics; therefore, they have been widely used in many applications including corrosion protection, wear resistance, electronics, and optics. Cr2O3 is well suited for wear resistance applications, as it is one of the hardest oxides with 29.5 GPa hardness. Several deposition techniques ...

Proximate composition (moisture, protein, total fat, and total ash) and textural characteristics (hardness, adhesiveness, springiness, cohesiveness, chewiness and firmness and work of shear) of cooked sausages formulated from mechanically deboned chicken meat (MDCM) with addition of chicken offal (heart, gizzard or liver) were investigated. Chicken offal replaced equal weight (15 kg) of MDCM in...

A commercial hardness testing machine was provided to represent a hardness reference standard in Slovenia. In order to evaluate how accurate the hardness scales realised with this machine could be, the main influence factors contributing to the uncertainties were verified and comparative measurements carried out, the results of which were compared with several laboratories owning primary hardne...

An investigation was carried out to understand the effects of solidification time of the cylindrical specimen on hardness, wear rate and the coefficient of friction of Aluminium alloy (LM4). The commercially available LM4 Aluminium alloy was melted in a crucible furnace under argon atmosphere. The molten metal was poured into sand moulds having dissimilar size holes. The cast rods were tested f...

Water hardness is a property depending on the presence of alkaline earth metals, mainly calcium and magnesium. Among the strategies for water quality monitoring, ecotoxicological assays are performed to minimize impacts and classify water bodies. For these laboratory evaluations parameters are previously defined in the guidelines, including water hardness for both cultivation and testing medium...