A series of smart window coated multifunctional NIR shielding-photocatalytic films were fabricated successfully through KxWO3 and F-TiO2 in a low-cost and environmentally friendly process. Based on the synergistic effect of KxWO3 and F-TiO2, the optimal proportion of KxWO3 to F-TiO2 was investigated and the FT/2KWO nanocomposite film exhibited strong near-infrared, ultraviolet light shielding a...

In this research work, silica nano-porous thin films were deposited on glass substrates by layer by layer method. The thin films were calcinated at various calcination temperatures (200, 300, 400, and 500 °C). The morphology, surface characteristics, surface roughness and hydrophilic properties of the thin films were investigated by field emission scanning electron microscopy, attenuated total ...

Thin films of LaS were prepared by using spray pyrolysis technique at 270 0 C and thickness were varied by changing the concentration of reactant solution. The films were optically characterized and their variations with film thickness were studies. It was found that thickness can be tuned by varying concentration of reactant solution. The band gap was found to vary between 2.35eV to 2.50eV. Th...

Transport, mechanical and global migration data concern multilayer food packaging films with different layouts, all incorporating a layered silicate/polyamide nanocomposite as oxygen barrier layer, and a low-density polyethylene (LDPE) as moisture resistant layer in direct contact with food. The data are related to "Tuning of co-extrusion processing conditions and film layout to optimize the pe...

The fabrication of many devices in modern technology requires techniques for growing thin films. As devices miniaturize, manufacturers will need to control thin film growth at the atomic level. Because many devices have challenging morphologies, thin films must be able to coat conformally on structures with high aspect ratios. Techniques based on atomic layer deposition (ALD), a special type of...

We present the layer-by-layer assembly of an electroactive polymer nanocomposite thin film containing cationic linear poly(ethyleneimine) (LPEI) and 68 vol % anionic Prussian Blue (PB) nanoparticles, which allow for electrochemical control over film thickness and mechanical properties. Electrochemical reduction of the PB doubles the negative charge on the particles, causing an influx of water a...

copper sulphide (cu 2 s) thin films at different thicknesses and annealing temperatures were deposited onto glass substrate by vacuum evaporation method. xrd study reveals the phase transformation of cu     2 s film at higher thickness. optical and resistivity study show the phase transformation of the film from cu     2 s to cus when they are annealed at higher temperature. sem st...

To apply the nanomaterial as a component in the packaging material structure, in this research, the carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared with three levels of nanoclay particles (0.5, 1 and 3%) using solution casting evaporation method. The incorporation of nanoclay on mechanical, water vapor permeability, and oxygen barrier properties of CMC/PVA-based film wa...

The carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared by adding three levels of nanoclay particles (0.5, 1 and 3%) using solution casting evaporation method. The incorporation of nanoclay on mechanical, water vapor permeability, and oxygen barrier properties of CMC/PVA-based film was investigated. The best result was obtained through the nanocomposite film contain 3% nano...