The arch-shaped single electrode based triboelectric nanogenerator (TENG) is fabricated using thin film of reduced graphene oxide nanoribbons (rGONRs) with polyvinylidene fluoride (PVDF) polymer used as binder to effectively convert mechanical energy into electrical energy. The incorporation of rGONRs in PVDF polymer enhances average surface roughness of rGONRs/PVDF thin film. With the combinat...

Thermally rearranged (TR) polymers, which are considered the next-generation of membrane materials because of their excellent transport properties and high thermal and chemical stability, are proven to have significant drawbacks because of the high temperature required for the rearrangement and low degree of conversion during this process. We demonstrate that using a [3,3]-sigmatropic rearrange...

We demonstrate a method to fabricate ultra-thin, ultra-smooth and low-loss silver (Ag) films using a very thin germanium (Ge) layer as a wetting material and a rapid post-annealing treatment. The addition of a Ge wetting layer greatly reduces the surface roughness of Ag films deposited on a glass substrate by electron-beam evaporation. The percolation threshold of Ag films and the minimal thick...

A palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. The ceramic support surface was modified by two TiO2-boehmite and one γ-alumina layers to avoid Pd penetration in support pores. Thin and defect-free Pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using Pd nanopa...

The field of nanotechnology is rapidly maturing into a fertile and interdisciplinary research area from which new sensor and actuator technologies can be conceived. The tools and processes derived from the nanotechnology field have offered engineers the opportunity to design materials in which sensing transduction mechanisms can be intentionally encoded. For example, singleand multi-walled carb...

Exotic manipulation of the flow of photons in nanoengineered materials with an aperiodic distribution of nanostructures plays a key role in efficiency-enhanced broadband photonic and plasmonic technologies for spectrally tailorable integrated biosensing, nanostructured thin film solarcells, white light emitting diodes, novel plasmonic ensembles etc. Through a generic deterministic nanotechnolog...

Composite materials made of mesoporous oxide thin films containing metallic nanoparticles are of high interest in various fields, including catalysis, biosensing and non-linear optics. We demonstrate in this work the fabrication of such composite materials containing a sub-monolayer of gold nanoparticles (GNPs) of various shapes covered with mesoporous silica thin films. Additionally, the shape...

Abstract: Different thickness of Cu2S thin films were prepared by vacuum evaporation under a pressure of 10-6 torr at an evaporation rate of 3Å /sec. Cu2S has direct band gap energy and indirect band gap energy at 1.2eV and 1.8 eV respectively. This paper presents the analysis of structural and optical properties of the Cu2S thin film by X-ray diffractometer (XRD) and UV-Vis-NIR Spectrophotomet...

titanium nitride-copper (tin-cu) nanocomposite films were deposited onto stainless steel substrate using hollow cathode discharge ion plating technique. the influence of cu content in the range of 2-7 at.% on the microstructure, morphology and mechanical properties of deposited films were investigated. structural properties of the films were studied by x-ray diffraction pattern. topography of t...