Fully compositional and thermal reservoir simulation capabilities are important in oil exploration and production. There are significant resources in existing wells and in heavy oil, oil sands, and deep-water reservoirs. This article has two main goals: (1) to clearly identify chemical engineering sub-problems within reservoir simulation that the PSE community can potentially make contributions...

In this paper, a new solar-heated generation system with capacity of 10kW is designed. The system is based on solar-heated Rankine cycle. The CPC solar energy collector array is used as the main heat source, and the gas boiler as the assistant heat source. The heat storage facility provides heat for put-off 24 hours generating without sun’s radiation. The paper is focused on the analysis of fou...

in many reservoirs, after water flooding, a large volume of oil is still left behind. hot water injection is the most basic type of thermal recovery which increase recovery by improved sweep efficiency and thermal expansion of crude.in the present work, the effects of injection rate and the temperature of the injected water were surveyed by using core flooding apparatus. water flooding was perf...

In recent years, the monitoring of oil-based liquids has gained increasing importance in various branches of the industry. In this contribution we discuss the application of a miniaturized thermal conductivity sensor for the monitoring of water contamination and deterioration processes in mineral oil. The sensor, which utilizes the hot film principle, features a molybdenum resistive structure s...

Amit Kumar Jain Abstract— Presently the world has enormous advancement in science and technology the topic considered here is just a drop out of an ocean of knowledge. Higher product quality, better reliability, better availability of plants, optimization of cost and efficient working of boilers is the chief concern now a days. Generally the production can be increased by the efficient use of b...

Combustion mechanism of a 300 MW pulverized coal boiler is analyzed and the optimization of the performance of the boiler is carried out. The flow field, temperature field, devolatilization, char combustion and CO generation in the boiler furnace under actual condition is obtained by using Fluent. Three methods to improve the efficiency of boiler combustion are proposed based on the pulverized ...

Fault diagnosis and fault tolerant control applications require that the structure of the target process contains certain redundancy in system observability and controllability. Usually the analysis of the existence of these properties is based on the laborious state space model of the process. However, the state space model is not necessary needed for the analysis. In this paper a structural a...

AbstractDeaerator is normally used in Chemical Industries, Process Industries, Power Plants and in Paper and Pulp Industries. The oxygen in the boiler feed water is the main reason of boiler corrosion. Oxygen corrosion is one of the biggest dangers of boiler. The function of the deaerator is to remove the dissolved oxygen from the boiler feed water before entering into boiler .The removal of di...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

The exponential increase of plastic production produces 100 million tonnes of waste plastics annually which could be converted into hydrocarbon fuels in a thermal cracking process called pyrolysis. In this research work, a direct current (DC) thermal plasma circuit is designed and used for conversion of low density polyethylene (LDPE) into diesel oil in a laboratory scale pyrolysis reactor. The...