No reports have described experiments designed to determine the strength characteristics of spinal nerve roots and rami radiculares for the purpose of explaining the complexity of symptoms of medullary cone lesions and cauda equina syndrome. In this study, to explain the pathogenesis of cauda equina syndrome, monoaxial tensile tests were performed to determine the strength characteristics of sp...

The inherent strength of individual carbon nanotubes (CNTs) offers considerable opportunity for the development of advanced, lightweight composite structures. Recent work in the fabrication and application of CNT forms such as yarns and sheets has addressed early nanocomposite limitations with respect to nanotube dispersion and loading and has pushed the technology toward structural composite a...

This study evaluated the tensile and flexural strength of tungsten inert gas (TIG) welds in specimens made of commercially pure titanium (CP Ti) compared with laser welds. Sixty cylindrical specimens (2 mm diameter x 55 mm thick) were randomly assigned to 3 groups for each test (n=10): no welding (control), TIG welding (10 V, 36 A, 8 s) and Nd:YAG laser welding (380 V, 8 ms). The specimens were...

introduction: laser tissue soldering using albumin and indocyanine green dye (icg) is an effective technique utilized in various surgical procedures. the purpose of this study was to perform laser soldering of rat skin under a feedback control system and compare the results with those obtained using standard sutures. material and methods: skin incisions were made over eight rats’ dorsa, which w...

This paper focuses on comprehensive sensitivity analyses of various rigid pavement scenarios. Jointed Plain Concrete Pavement ( JPCP) sections designed for three traffic levels in each of five climate zones are evaluated in the sensitivity analyses. One-at-a-time (OAT) local sensitivity analysis was implemented using a design limit normalized sensitivity index (NSI) to provide both quantitative...

The use of falling weight deflectometer—based backcalculation techniques to determine pavement layer moduli is a cost-effective and widely used method for the structural evaluation of an existing pavement. The nonlinear stress-sensitive response of pavement geomaterials has been well established, and mechanisticbased pavement design can be improved by inclusion of these nonlinear material prope...

Reclaimed asphalt pavement (RAP) has been widely used in pavement. However, the fatigue performance of hot-mix (HMA) with RAP is a critical factor to ensure durability. In this study, tests using an Overlay Tester (OT) were conducted novel load-controlled mode. contents 0, 25% and 50%, respectively. cyclic loading, life energy parameters measured. Results indicated that decreased both fracture ...

Polymer-based nanocomposites due to their advantages such as corrosion resistance,adequate mechanical properties and low cost are widely used in modern technologies. The increasing application of these nanocomposites, and hence their welding seems unavoidable. In this paper, a novel hottool in friction stir welding process is used for butt welding nanocomposite plates of 5 mm thick containing p...

This study examines the effectiveness of HMA overlay design strategies for the purpose of controlling the development of reflective cracking. A parametric study was conducted using a 3D Finite Element (FE) model of a rigid pavement section including Linear Viscoelastic (LVE) material properties for the Hot Mix Asphalt (HMA) overlay and non-uniform tire-pavement contact stresses. Several asphalt...

Glycyrrhiza glabra extract is gaining increasing acceptance as a folk remedy for treatment of wound. We studied the effect of its extract on wound tensile strength in albino rats. 20 male albino rats had a linear 3 cm incision made over skin of back. The animals were randomly divided into two experimental groups, as control and treatment. Animals of control group received topical cold cream onc...