We first fabricated the superhydrophobic film with a water contact angle of 178 degrees based on a perpendicular nanopin fractal structure by a bottom-up process. Until now, only materials with an original water contact angle larger than 90 degrees , which is classified as hydrophobicity, could be used to fabricate the superhydrophobic film (>170 degrees ) according to the possible fractal stru...

We demonstrate Raman lasing near 650 nm in pure water microdroplets located on a superhydrophobic surface. In the experiments, stationary, pure water microdroplets were prepared on a superhydrophobic surface and excited by a pulsed, frequencydoubled Nd:YAG laser at 532 nm. Intense laser emission was observed at frequencies corresponding to the whispering gallery mode resonances of the water mic...

Development of durable non-wetting surfaces is hindered by the fragility of the microscopic roughness features that are necessary for superhydrophobicity. Mechanical wear on superhydrophobic surfaces usually shows as increased sticking of water, leading to loss of non-wettability. Increased wear resistance has been demonstrated by exploiting hierarchical roughness where nanoscale roughness is p...

Friction between contacting surfaces of metal materials restricts the application of mechanical support in the high-precision inertial device of a rotational gyroscope. Instead, a diskor ring-shaped rotor is electrostatically or magnetically suspended. However, stability of the rotor suspension restricts further improvement of the measurement precision. In the developed rotational gyroscope, a ...

Superhydrophobic self-cleaning surfaces were produced with simultaneous wide-angle optical transmittance in the near-infrared region and antireflection properties from combination of multi-scale surface topology based on silica nanoparticles, index grading and interference.

Patterns with controllable adhesion on superhydrophobic areas have various biomedical and chemical applications. Electrolyte jet machining technique (EJM), an electrochemical machining method, was firstly exploited in constructing dimples with various profiles on the superhydrophobic Al alloy surface using different processing parameters. Sliding angles of water droplets on those dimples firstl...

Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2-CHSi(OMe)3)n-RF (RF-(VM)n-RF)] undergoes the sol-gel reaction in the presence of N-(3-triethoxysilylpropyl)gluconamide [Glu-Si(OEt)3] under alkaline conditions to afford the corresponding fluorinated oligomeric silica nanocomposites containing gluconamide units [RF-(VM-SiO3/2)n-RF/Glu-SiO3/2]. These obtained nanocomposites were appl...

A combination of UV/ozone and vacuum pyrolysis treatments is introduced to tune the wetting properties of vertically aligned multiwalled carbon nanotube arrays. The UV/ozone treatment renders these arrays superhydrophilic by functionalizing them with oxygenated functional groups. These superhydrophilic arrays have a high affinity to water such that they have a very high specific capacitance in ...

Dense and vertically aligned ZnO nanorod arrays with a large area have been fabricated successfully on the stainless steel mesh by a simple chemical vapor deposition method. The coated mesh exhibited both superoleophilic and superhydrophobic properties, even if it was not modified by low surface energy materials. The separation efficiencies were more than 97% in the filtration of water and oil....