The flexural properties of commercial bagasse-filled polyethylene (PE) and polypropylene (PP) composites were determined as a function of strain rate at room temperature. The applied strain rates were 1.5 ×10, 3.75×10, 7.5×10, and 1.5×10 s. The flexural modulus tended to increase linearly for the two types of composites with the logarithm of strain rate. The bending strength of polypropylene co...

Kinetic measurements in the pH range 7.0 to 9.4 were made by the temperature jump technique, and comparative values of Keg were determined by a spectrophotometric titration method based on absorption difference at 550 rnp between ferriand ferrocytochrome C. Also, stopped flow experiments at 550 rnp were performed at pH 9.5. In all of these experiments, excess sodium ferrocyanide (8 X 10u3 M) wa...

The characteristic bending strength (MOR) and mean modulus of elasticity (MOE) of tropical hardwood red seraya (Shorea spp.) plywood were determined using European Standard EN310 and EN789. The thickness of the test specimen was 4.0mm, 7.0mm, 9.0mm, 12.0mm and 15.0mm. The experiment found that the MOR of red seraya plywood in EN310 is about 12% to 20% and 7% to 24% higher than EN789 whereas MOE...

In the present study, the presence of brass mesh on the bond strength of aluminum (AA1050) strips in the cold roll bonding process was investigated. The influence of various process parameters including reduction in thickness, pre-rolling annealing, initial thickness of the strips, and post-rolling annealing was also considered. After cold roll bonding process, peeling test was carried out and ...

steelmaking slag of mobarakeh steel company (msc) has a high iron content which makes it unsuitable for conventional slag recovery; as in cement industries. on the other hand, eaf slag in this company is almost free of zinc because of using more than 90 percent dri in the charge. therefore, removal or recovery of iron from the slag can be a suitable solution to slag recovery in this company. in...

Steelmaking slag of Mobarakeh Steel Company (MSC) has a high iron content which makes it unsuitable for conventional slag recovery; as in cement industries. On the other hand, EAF slag in this company is almost free of zinc because of using more than 90 percent DRI in the charge. Therefore, removal or recovery of iron from the slag can be a suitable solution to slag recovery in this company. In...

although bearing capacity of footings on top of slopes under monotonic loadings have been investigated widely so far, safety and bearing capacity of these structures against repeated dynamic loads have not been considered well enough. in this paper, lower bound dynamic shakedown theorem in its numerical form has been employed to firstly obtain bearing capacity of strip footings on top of slopes...