Nanocomposite Nb-C coatings, with a C/Nb ratio of 0.93 1.59, have been deposited by reactive sputtering in a commercial sputtering system where the C is supplied from an acetylene gas at deposition rates of up to 200 nm/min. The coatings are compared to nonreactively sputtered Nb-C coatings deposited from Nb and C targets in lab-scale equipment at deposition rates two orders of magnitude lower....

The objective of this study was to characterize the physicochemical, dissolution, and osteogenic properties of radio frequency magnetron sputtered dicalcium pyrophosphate/tricalciumphosphate (Pyro/TCP) and hydroxylapatite (HA) coatings. Therefore Pyro/TCP and HA coatings were deposited on grit-blasted titanium discs. The results showed that the deposited coatings were amorphous and changed into...

This work focuses on the synthesis and characterization of polymeric smart self-healing coatings. A comparison structural, thermal, properties two different coatings comprising distinct agents (tung oil linalyl acetate) is studied to elucidate role in corrosion protection. Towards this direction, urea-formaldehyde microcapsules (UFMCs) loaded with tung (TMMCs) acetate (LMMCs) were synthesized u...

Cr-Nb-Al-N coatings with Al content from 0 to 12 at.% were deposited by d.c. reactive magnetron sputtering. The coatings were annealed in protective atmosphere at 800 and 900 o C for 1h and exposed to air at 800, 900 and 1200 o C for different times. The chemical composition, structure, microstructure, hardness and adhesive/cohesive strength of the coatings, in as-deposited and annealed conditi...

Nickel-Phosphorus (Ni-P) composite coatings were prepared on a poplar veneer surface via a simple electroless nickel (Ni) approach. The substrate deformation, flatness, crystalline structure, and wear resistance of the NiP composite coatings were investigated. The deformation degree of the substrate decreased as the number of deposition steps was increased. The flatness and wear resistance of t...

Metal surface structure/biomedical function integration is the current research focus. In previous studies, we have successfully prepared the microporous coatings containing zinc on the pure titanium surface by MAO. In the study, osteoblasts were seeded on the surface of the microporous coatings containing zinc and the adhesion of osteoblasts were evaluated, and the antibacterial activity of th...

Ceramic coatings with high emissivity were fabricated on TC4 alloys by micro-arc oxidation technique (MAO) in mixed silicate and phosphate electrolytes with varying KMnO₄ addition. The microstructure, phase and chemical composition were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), and the infrared emissivity of the MAO...

Poly(ethylene oxide) (PEO) coatings have been shown to reduce the adhesion of different microbial strains and species and thus are promising as coatings to prevent biomaterial-centered infection of medical implants. Clinically, however, PEO coatings are not yet applied, as little is known about their stability and effectiveness in biological fluids. In this study, PEO coatings coupled to a glas...

The purpose of this study was to investigate the crystallographic characteristics of 3 sets of plasma-sprayed hydroxyapatite (HA) coatings prepared with different degrees of crystallinity on Ti-6Al-4V substrates. X-ray diffraction analyses were performed on the coatings to determine mean percent crystallinity, calcium phosphate phases present, average crystallite size, and residual strain. The ...

Corrosion behavior of Ni20Cr coatings deposited by HVOF (high velocity oxygen-fuel) process was evaluated in ZnCl2-KCl (1 : 1 mole ratio) molten salts. Electrochemical techniques employed were potentiodynamic polarization curves, open circuit potential, and linear polarization resistance (LPR) measurements. Experimental conditions included static air and temperatures of 350, 400, and 450°C. 304...