The aim of the study was to evaluate the core veneer bond strength of graded zirconia combinations and compared those to conventional zirconia combinations after thermal and mechanical tests. Conventional zirconia-veneer combinations and graded zirconia-veneer combinations were made into cylinders. Prior to shear bond testing, half of each group was subjected to thermal and mechanical cycling t...

The impact of cold temperatures on the shear strength of Scots pine (Pinus sylvestris) joints glued with seven commercially available adhesives was studied in this work. The cold temperatures investigated were: 20, −20, −30, −40, and −50 °C. Generally, within the temperature test range, the shear strength of Scots pine solid wood and wood joints were more resistant to the effect of temperature ...

Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...

statement of the problem: the bond strength of composites with different adhesive systems with dentin is an important factor in long term durability of composite restorations. the effect of titanium tetrafluoride (tif4) as anti caries agent and sodium hypochlorite (naocl) as disinfectant on the shear bond of nanofilled and silorane based composite resins have not been investigated in previous s...

the present research is concerned with the determination of ductility, over-strength and response modification factors of coupled steel shear wall frames. three structural models with various numbers of stories, bay width and coupling beam height were analyzed using static pushover and incremental nonlinear dynamic analyses. the ductility, over-strength and response modification factors for the...

statement of problem: following the increasing use of composites in restoring anterior and posterior teeth, problems due to its technique sensitivity have become a major concern. one of these problems is the possibility of contamination of dentin with saliva, blood and/or gingival fluid in different stages of bonding procedure, even with application of different methods of isolation. however, b...

introduction: failures might occur at metal‒porcelain interfaces as a problem with metal‒ceramic restorations even with the application of airborne-particle abrasion technique. this study was undertaken to evaluate the effect of nd:yag laser treatment on the bond strength of porcelain fused to metal. methods:  twenty-four cylindrical specimens (4 mm in diameter and 4 mm in height) were made of ...

The present research is concerned with the determination of ductility, over-strength and response modification factors of coupled steel shear wall frames. Three structural models with various numbers of stories, bay width and coupling beam height were analyzed using static pushover and incremental nonlinear dynamic analyses. The ductility, over-strength and response modification factors for the...

rice husk ash (rha) is natural pozzolan containing reactive silica and/or aluminum. when the material is mixed with lime in powdered form and in the presence of water, it will set and harden like cement. this work uses osadebe’s optimization model to optimize the shear modulus of concrete made from rha. the strengths predicted by the model are in good agreement with their corresponding experime...