Coupling shear wall has been highly considered in recent years. Due to architectural limitations, sometimes the architect is forced to use two spans separate from shear wall. The study results have shown that using coupling shear wall will have better results than single wall in structure behavior and the desired performance can be achieved by using thinner plates. Coupling steel shear wall has...

The use of heavier trucks demanded upgrading of a twenty-seven year old bridge in Winnipeg, Manitoba, Canada. Analysis of the precast prestressed concrete girders using the current AASHTO Code indicates a deficiency in the shear capacity. Shear strengthening using Carbon Fibre Reinforced Polymer (CFRP) sheets provides a low-cost solution by increasing the speed of construction and reducing traf...

This paper investigates the behaviour of C-shaped and L-shaped angle shear connectors embedded in solid concrete slabs. An effective finite element model is proposed to simulate the push out tests of these shear connectors that encompass nonlinear material behaviour, large displacement and damage plasticity. The finite element models are validated against test results. Parametric studies using ...

To study mechanical behaviors of shear walls built with precast two-way hollow slabs, two shear walls with different details of hollow slabs were quasi-statically tested under low cyclic loading. The failure mode was analyzed, which vertical macro-cracks appeared on walls due to the details of hollow slabs. Brittle shear failure can be avoided in terms of the failure behaviors evolved from inte...

Article history: Received: 14.5.2014. Received in revised form: 20.1.2015. Accepted: 14.5.2015. In order to determine the deformation capacity of reinforced concrete composite shear wall with concealed bracings at different performance levels, some previous research of domestic scholars are reviewed by analyzing 89 shear wall specimens using a performance-based seismic design method. The perfor...

this paper aims at investigating the effects of weld nugget size and expulsion on the mechanical properties of low carbon steel resistance spot welds using tensile-shear test. mechanical performance of spot welds are described in terms of failure mode, peak load and failure energy obtained from the tensile-shear test. the effects of voids and porosity as well as electrode indentation associated...

[1] We have conducted surveys of gullies that developed in a small, steep watershed in the Idaho Batholith after a severe wildfire followed by intense precipitation. We measured gully length and cross sections to estimate the volumes of sediment loss due to gully formation. These volume estimates are assumed to provide an estimate of sediment transport capacity at each survey cross section from...

Molecular dynamics (MD) simulations under transverse shear, uniaxial compression, and pullout loading configurations are reported for multiwall carbon nanotubes (MWCNTs) with different fraction of interwall sp3 bonds. The interwall shear coupling in MWCNTs is shown to have a strong influence on load transfer and compressive load carrying capacity. A new continuum shear-coupled-shell model is de...