In this study, the flexural behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) is examined as a function of fiber length and volume fraction. Straight steel fiber with three different lengths (lf) of 13, 19.5, and 30 mm and four different volume fractions (vf) of 0.5%, 1.0%, 1.5%, and 2.0% are considered. Test results show that post-cracking flexural properties of UHPFRC, suc...

A two-dimensional thermal elasto-plastic numerical model is developed by finite element method to analyze and compare the mechanical driving factor for heat affected zone (HAZ) liquation cracking during laser welding and hybrid laser-arc welding techniques. Calculations of transient temperatures and cooling rates are used in conjunction with solidification theory to analyze weld pool characteri...

This paper described the discovering process of some shortcomings of the conventional fluid catalytic cracking (FCC) process and the proposed two-stage riser (TSR) FCC process for decreasing dry gas and coke yields and increasing light oil yield, which has been successfully applied in 12 industrial units. Furthermore, the multifunctional two-stage riser (MFT) FCC process proposed on the basis o...

The kinetics of palm oil catalytic cracking over aluminum containing mesoporous silica Al-MCM-41 (5% Al) was investigated in a batch autoclave reactor at the temperatures range of 573 – 673 K. The catalyst was prepared by using sol-gel technique and has been characterized by nitrogen adsorption and x-ray diffraction methods. Surface area of 1276 m/g with average pore diameter of 2.54 nm and por...

This report describes the details of two new proof-of-concept Bluetooth security analysis tools and two new attacks against Bluetooth security. On-Line PIN Cracking script is a security analysis tool for on-line Bluetooth device PIN cracking. Brute-Force BD ADDR Scanning script is a security analysis tool for brute-force discovery of the addresses of Bluetooth devices that want to be private. S...

In a remarkable series of experiments, Elssner et al. (1994) and Korn et al. (2002) observed cleavage cracking along a bimaterial interface between Nb and sapphire. The stress required for cleavage cracking is around the theoretical strength of the material. Classical plasticity models fall short to reach such a high stress level. We use the conventional theory of mechanism-based strain gradien...

High performance concrete (HPC) bridge decks are prone to premature cracking if movement is restrained. Internal curing (IC) can reduce shrinkage cracking in concrete structures, thus improving their performance and service life. However, there is very limited information available in the literature on the possible extension of service life due to internal curing. This paper addresses this ques...

plastic shrinkage is one of the most important parameter which must be considered in hot weather concreting. if plastic shrinkage is not prevented, cracking will be significant, especialy if silica fume is used in the mix. in this paper, the effect of silica fume in bleeding and evaporation was investigated in laboratory. the results showed that in restrained shrinkage, beside relative humidity...

In situ transmission electron microscopy study of electric field-induced cracking has been conducted on ^001& oriented 0.65Pb~Mg1/3Nb2/3!O3 – 0.35PbTiO3 crystal. Fracture of the 90° domain boundary was directly observed in the tetragonal area under both static and alternating electric fields. The field strength required to induce domain boundary cracking was lower for alternating electric field...

A coupled reactor/furnace simulation has been conducted for a 100 kt/a SL-II naphtha cracking furnace containing both long-flame and radiation burners. The computational fluid dynamics approach was used to simulate the flow, combustion and radiative heat transfer in the furnace. The software packages COILSIM1D and SimCO were used to account for the cracking process in the reactor coils. The sim...