in this study, porcelain bond strength to three different alloys of gold-base, pd-ag and base-metal were compared and the effect of repeated porcelain sintering on bond strength was evaluated. the obtained results showed best bond strength of porcelain with gold-base alloy. pd-ag and base-metal alloys showed less strength respectively. during repeated sintering of porcelain, bond strength has n...

To gain insight into the potential for aerosolization of viruses in wastewater systems, we investigated the partitioning of MS2 and Phi6 bacteriophages in synthetic sludge and anaerobically digested sludge from a wastewater treatment plant. We evaluated partitioning among the liquid, solids, and material surfaces of porcelain, concrete, polyvinyl chloride (PVC), and polypropylene. In all cases,...

AIMS The aims of this study were to investigate the influence of commercially pure titanium (PTi) and titanium-aluminum-vanadium (Ti-6Al-4V) alloys (TiA) on the final shade of low-fusing porcelain bonded to them and to compare the shade changes with those of three conventional metal-ceramic systems. METHODS AND MATERIALS A titanium casting unit was used to cast PTi and Ti-6Al-4V alloy specime...

Objective: To evaluate fracture strength of veneered translucent zirconium dioxide crowns designed with different porcelain layer thicknesses. Materials and Methods: Sixty crowns, divided into six groups of 10, were used in this study. Groups were divided according to different thicknesses of porcelain veneer on translucent zirconium dioxide cores of equal thickness (0.5 mm). Porcelain thicknes...

STATEMENT OF THE PROBLEM Porcelain may fracture or chip if exposed to any traumas and can be repaired by using a resin composite. PURPOSE This study was aimed to evaluate the influences of Er:YAG laser on shear bond strength (SBS) of resin composite to feldspathic porcelain. MATERIALS AND METHOD Seventy-two porcelain blocks were divided into six groups (n=12): G1: no treatment (control grou...

PURPOSE The porcelain fused to gold has been widely used as a restoration both with the natural esthetics of the porcelain and durability and marginal fit of metal casting. However, recently, due to the continuous rise in the price of gold, an interest towards materials to replace gold alloy is getting higher. This study compared the bond strength of porcelain to millingable palladium-silver (P...

OBJECTIVES The purpose of the current study was to examine the impact of thermocycling on the development of surface flaws on the cemented surfaces of PLV restorations prepared by acid-etching or alumina (Al2O3) abrasion. METHODS Sets of 30 Vitadur-alpha dentin porcelain discs (15 mm diameter, 0.9 mm thickness) were prepared by either abrading with 50 microm Al2O3 or hydrofluoric (HF) acid-et...

A method of testing the tensile strength of the porcelain-gold bond has been developed. Tensile strengths of the bond are improved primarily by the formation of an oxide layer on the gold before baking the porcelain and not by the degree of gross surface roughness. The oxide layer may act either as a transition ayer or i t may create microsurface roughness. The gross surface roughness probably ...

Veneering ceramics designed to be used with modern zirconia framework restorations have been reported to fracture occasionally in vivo. The fracture toughness of such veneering ceramics was measured and compared to that of conventional feldspathic porcelain veneering ceramics for metal framework restorations. The fracture toughness of the leucite free veneer was measured to be 0.73 MPa m ± 0.02...