Hybrid fiber reinforced concrete (HFRC) consisting of two or more different types of fibers has been widely investigated because of its superior mechanical properties. In the present study, the effect of the addition of steel (0.25%, 0.5%, 0.75%, and 1% of concrete volume) and Polypropylene (0.2%, 0.4%, and 0.6% of concrete volume) fibers on the surface scaling resistance of concrete, depth of ...

In this study, dyeing of two regenerated polyester fibers, poly-trimethylene terephthalate (PTT) and poly-lactic acid (PLA), with natural dyes were compared with that of poly-ethylene terephthalate (PET) fiber. Lac was used as the primary natural colorant while Catechu was chosen as a natural color that can also act as a biomordant. The effects of temperature, initial pH of dye bath and dyeing ...

Over the past decades, bioactive glass (BG) has been of a great interest in the bone regeneration field, due to its excellent biocompatibility, bioactivity and osteoconductivity. Herein, fabrication of bioactive glass as one-dimensional fibers by employing an Electrospinning process is reported. The Sol-Gel method was chosen considering the final fibers smoothness and homogeneity. Starting sol ...

introduction: we did this study because there were a few studies about aorto-branch junction. methods: four light microscope and electron microscope study, the abdominal aorta, renal artery, and the adjoining right and left renal arteries were dissected out from 4 neonate dogs. results: based on the results, there is only one cell type in the tunica intima of endothelium in both arteries. in ab...

waste tires, rubbers, plastic and steel materials, normally produced in every society, enter the environment and cause serious problems. these problems may, to some extent, be reduced by finding applications for them in engineering, for example, they can be used for geotechnical applications as backfill material and solving problems with low shear strength soils. such materials may be subjected...

in this paper, nano fibers (engelhard corporation titanosilicate number 10 / polyacrylonitrile) ets-10 / pan, as a composite exchanger to absorb heavy metals, were synthesized and optimized. several parameters were affected on this absorption. results show that the optimization sizes of the nano fibers are about 75 nanometers. structures were analyzed by scanning electron microscope (sem) and e...

In the present study, the transient stress distribution caused by a break in the fibers of an adhesive bonding is investigated. Transient stress is a dynamic response of the system to any discontinuity in the fibers from detachment time till their equilibrium state (or steady state). To derive the governing dynamic equilibrium equations shear lag model is used. Here, it is assumed that the tens...