This paper proposes chordal surface transform for representation and discretization of thin section solids, such as automobile bodies, plastic injection mold components and sheet metal parts. A multiple-layered all-hex mesh with a high aspect ratio is a typical requirement for mold flow simulation of thin section objects. The chordal surface transform reduces the problem of 3D hex meshing to 2D...

This thesis reports the main results in photonic module integration using silicon, multilayer ceramic and plastic technologies. In order to implement high-performance photonic modules the accurate alignment between critical devices and components is very essential. Costefficient photonic modules in volume production can be achieved, when the alignment of devices and components is implemented pa...

Glassy alloy rods with diameters up to 1.5mm exhibiting a large supercooled liquid region before crystallization and high mechanical strength were formed in Cu-Zr and Cu-Hf binary alloy systems by the copper mold casting method. The large supercooled liquid region exceeding 40K was obtained in the composition range of 30 to 70 at%Zr and 35 to 60 at%Hf. The largest value of the supercooled liqui...

Results from mathematical models and plant experiments are combined to quantify the effect of transverse depressions and oscillation marks on heat transfer in the continuous casting mold. A heat transfer model has been developed to calculate transient heat conduction within the solidifying steel, coupled with the steady-state heat conduction with the continuous casting mold wall. The model feat...

We describe a novel UV-curable mold that is stiff enough for replicating dense sub-100-nm features even with a high aspect ratio. It also allows for flexibility when the mold is prepared on a flexible support such that large area replication can be accomplished. The composite material of the mold is inert to chemicals and solvents. The surface energy is made low with a small amount of releasing...