This paper presents a comparative study on the effects of high temperature (~500°C) on carbonated calcium silicate-based cement (CSC), hydrated ordinary Portland cement (OPC), and hydrated OPC with 20% fly ash (FA) paste samples. The CSC is primarily composed of calcium–silicate minerals with different calcium to silica atomic ratios, such as wollastonite, rankinite, and pseudowollastonite. The...

Carbon nanotubes (CNTs) have excellent mechanical properties and can be used to reinforce cement-based materials. On the other hand, the reaction product of carbonation with hydroxides in hydrated cement paste can reduce the porosity of cement-based materials. In this study, a novel method to improve the strength of cement paste was developed through a synergy of carbon nanotubes decorated with...

AIM To investigate the chemical interaction of calcium hydroxide with the corticosteroid triamcinolone acetonide in Ledermix Paste and in Odontopaste, a new steroid/antibiotic paste. METHODOLOGY Validated methods were developed to analyse the interaction of calcium hydroxide in two forms, Pulpdent Paste and calcium hydroxide powder, with triamcinolone acetonide within Odontopaste and Ledermix...

Nnam gon, a cake made by steam cooking a mixture of Cucurbitaceae seeds paste and others ingredients specially spices, is a highly prized dish in Central African region. A preliminary investigation conducted as part of this study highlighted that formulations used in the processing of Nnam gon vary according to the spices used. This study was carried out to determine the best formulation for th...

Before surface mount components can be placed on a circuit board, it is necessary to print solder paste onto pads. The paste is then melted to make an electrical connection (reflow). A screen printing process is used to print the solder paste onto the board. This is a complicated process with a large number of input parameters. Some of these parameters can be controlled and it is the purpose of...

This study evaluated the ability of ions from a non-alcoholic calcium hydroxide-propolis paste to diffuse through dentinal tubules. Thirty-six single-rooted bovine teeth were used. The tooth crowns were removed, and the root canals were instrumented and divided into 3 groups: Group 1 - calcium hydroxide-propylene glycol paste; Group 2 - calcium hydroxide-saline solution paste; Group 3 - calcium...

Lycopene bioavailability from a single dose of fresh tomatoes or tomato paste (23 mg lycopene) ingested together with 15 g corn oil was compared by analyzing carotenoid concentrations in the chylomicron fraction. The lycopene isomer pattern was the same in both fresh tomatoes and tomato paste. The triacylglycerol response in chylomicrons was not significantly different after both treatments. In...

abstract the present research was conducted in a commercial orchard of pistachio during 2006-2007 in rafsanjan, iran. gibberellic acid (ga3) were applied at 0, 25, 50 and 75 mgl-1 and at three time of spray (the first of june, july and august) on “ahmad-aghai” pistachio cultivar. two branches of each tree was sprayed during two years of study. spraying at june had least of early splitting. ga3 ...

Aim To compare new remineralizing agents calcium sodium phosphosilicate paste and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste with that of fluoridated toothpaste in remineralization of early carious lesions using scanning electron microscopy and energy-dispersive X-ray (SEM-EDX) analysis. Materials and methods Sixty sound extracted premolars were collected and placed in ...