Occurrence of top down and bottom up fatigue cracking in asphaltic pavements is common. Conventional pavement analysis methods ignore the existence of cracks in asphaltic layers. However, it seems that the responses of cracked pavement would not be the same as a pavement without crack. This paper describes effects of crack type, position and length, and vehicles tire inflation pressure and axle...

The bituminous pavement rehabilitation alternatives are mainly overlaying, recycling and reconstruction. In the recycling process the material from deteriorated pavement, known as reclaimed asphalt pavement (RAP), is partially or fully reused in fresh construction. Some of the advantages associated with pavement recycling are (i) less user delay (ii) conservation of energy (iii) preservation of...

Many rural roadways in Iowa have centerline and/or edgeline pavement markings. The current Manual on Uniform Traffic Control Devices (MUTCD), however, requires centerline and/or edgeline pavement markings only along streets and roadways with traffic volumes much greater than 400 vehicles per day (the volume-based definition of a low-volume roadway in the MUTCD). This project was initiated to ga...

Each of pavements’ life cycle phases such as material extraction, transportation, construction, operation, rehabilitation, and end-of-life emits greenhouse gases. Such emissions can be influenced by climate change via changes in the rates of pavement deterioration and thus intensity and frequency of maintenance and rehabilitation. However, climate change has not been given full considerations i...

This paper reports the results of a two year field monitoring exercise intended to investigate the pollution abatement capabilities of a novel system which offers an alternative to the, now well established, pervious pavement system as a source control device for stormwater management. The aim of this study was to determine the effectiveness of a live installation of a macro-pervious pavement s...

In recent years pavement maintenance planning has become a main task among highway agencies. In order to determine the structural capacity of a flexible pavement, non-destructive testing equipment is used. Many countries use the falling weight deflectometer (FWD). It is possible to obtain deflection data and backcalculate the pavements’ mechanical properties. However, the method used affects th...

Deterioration models are important and essential part of any Pavement Management System (PMS). These models are used to predict future pavement situation based on existence condition, parameters causing deterioration and implications of various maintenance and rehabilitation policies on pavement. The majority of these models are based on roughness which is one of the most important indices in p...

Rubblization is one of the surface preparation techniques before placing a Hot Mix Asphalt (HMA) overlay that involves breaking the Portland Cement Concrete (PCC) pavement into pieces. This paper describes the structural assessment related to the long term performance of rubblized concrete pavements in Iowa. The structural performance of seven representative in-service rubblized concrete paveme...