A rechargeable cement-based battery was developed, with an average energy density of 7 Wh/m2 (or 0.8 Wh/L) during six charge/discharge cycles. Iron (Fe) and zinc (Zn) were selected as anodes, nickel-based (Ni) oxides cathodes. The conductivity electrolytes modified by adding short carbon fibers (CF). electrodes produced two methods: powder-mixing metal-coating. Different combinations cells test...

The increasing demand on high quality optical systems with complex geometries, low tolerances and a low installation space necessitates new replicative production systems for complex optical glass elements. The technology precision blank moulding shows promising properties to comply with these demands on an industrial bulk production. Due to the required high surface quality and low surface rou...

High velocity oxy-fuel (HVOF) is one of the emerging technologies among the thermal spraying techniques, for producing uniform and dense coatings, having high hardness and very low porosity. A NiCrBSi alloy coating was prepared with approximately 400µm thick, on the A516 steel by means of HVOF and was analyzed with regard to its detailed microstructures, phase formation, thickness, roughness an...

In this paper, Ni–Cr–Al coatings were deposited using the detonation spraying method. The aim was to investigate how technological parameters influence coating structure formation, phase composition and tribological performances. We observed that degree which barrel is filled with an O2/C2H2 gas mixture strongly influences chemical of manufactured coatings. High degrees filling led a decrease i...

In this work we present a study on the performance of CVD (chemical vapor deposition) graphene coatings grown and transferred on Ni as protection barriers under two scenarios that lead to unwanted metal ion release, microbial corrosion and allergy test conditions. These phenomena have a strong impact in different fields considering nickel (or its alloys) is one of the most widely used metals in...

We have prepared Ni-V(2)O(5).nH(2)O core-shell nanocable arrays for Li(+) intercalation applications. Ni-V(2)O(5).nH(2)O nanocables were prepared via formation of Ni nanorod arrays through the template based electrochemical deposition, followed by coating of V(2)O(5).nH(2)O on Ni nanorods through electrophoretic deposition. Transmission electron microscopy (TEM) micrograph clearly shows the Ni ...

Surface chemical and morphological modifications of as-plated Cr(III)-passivated monophasic zinc-nickel coatings induced by corrosion in chloride solutions are demonstrated. The passivated samples showed slower anodic dissolution, less significant de-alloying, smaller surface dezincification lower coating cracking, as demonstrated Scanning Electron Microscopy Energy Dispersive X-ray Spectroscop...

In the present study, Ni-P-CNT composite coating was successfully fabricated via electroless plating. Scanning electron microscopy (SEM) was used to characterize the coatings. The effect of CNTs concentration in the bath on its content in the composite coatings was studied. Furthermore, the corrosion behaviour of the coatings with different contents of CNTs was evaluated using Tafel polarizatio...

In order to form model aluminide coatings for studying critical issues related to their high temperature oxidation and corrosion performance, a laboratory chemical vapor deposition (CVD) procedure is being used to more rigorously control the coating process in terms of composition, purity and microstructure. One ferritic (Fe-9Cr1Mo) and one austenitic alloy (304L) were selected as substrate mat...