Monolithic ceramics have been fabricated from coated green fibers to create fibrous microstructures. The fibrous monoliths consist of high aspect ratio polycrystalline regions (cells) of a primary phase separated by thin secondphase regions (cell boundaries) designed to improve fracture resistance. The cells are the remnants of the green fiber which consists of ceramic powder and a polymer bind...

For the work presented herein nickel catalysts supported on γ-alumina extrudates (Ni/Al) with an egg-shell structure were prepared, using a modified Equilibrium Deposition Filtration (EDF) technique. Their performance was compared, for biogas dry reforming reaction, corresponding Ni/Al uniform structure, synthesized via conventional wet impregnation method. The bulk and surface physicochemical ...

We have studied the (110) surface of NiAl, an ordered alloy of B2 structure, using a plane-wave pseudopotential method. The clean surface and several oxidized surfaces were investigated, with oxygen coverages up to 1.5 ML (1 ML = 1 O-atom per surface metal atom). In order to compare the energies of the oxidized structures, which comprise different numbers of metal and oxygen atoms, one has to t...

Thin alumina films have found applications in electronic circuits and cutting tools and have been recently explored as protective coatings against high temperature oxidation, but these studies have been relatively rare. In this study, amorphous alumina films 3.5 pm thick were produced by reactive sputtering on Co-30Cr-6Al-0.5Y coatings, using a pure aluminum target in Ar + 0 2 atmosphere. Isoth...

The paper reviews progress for a program of research on alumina ceramics processing, with particular reference to diffraction results achieved using tube x-rays, neutrons and synchrotron radiation. Outcomes from three related studies are examined. l Calcination of alumina hydrates to o-alumina via intermediate aluminas, including some new results indicating the co-existence of cubic and tetrago...

Catalysts based on functionalised carbon nanofibers (FCNF) coated with Ni-decorated MoS2 nanosheets were obtained by direct decomposition of ammonium thiomolybdate and nickel nitrate impregnated on the FCNF under controlled temperature conditions in inert atmosphere. The catalysts were characterised by X-ray Diffraction (XRD), N2 adsorption, Raman spectroscopy, temperature programmed reduction ...

An efficient and green protocol for the synthesis of αaminonitriles derivatives by one-pot reaction of different aldehydes with amines and trimethylsilyl cyanides has been developed using natural alumina, alumina sulfuric acid (ASA), nano-γ-alumina, nanoalumina sulfuric acid (nano-ASA) under microwave irradiation and solvent-free conditions. The advantages of methods are short reaction times, h...

In order to reduce greenhouse gas emissions, which are reaching alarming levels in the atmosphere, capture, recovery, and transformation of carbon dioxide emitted methane is considered a potentially profitable process. This transformation, known as methanation, catalytic reaction that mainly uses catalysts based on noble metals such Ru and, although with less efficiency, transition Ni. improve ...

The influence of catalyst support alumina-silica in terms of different Al2O3 to SiO2 mole ratios containing 20 wt.% Ni on the production of hydrogen and catalyst coke formation from the pyrolysis-catalysis of waste tyres is reported. A two-stage reactor system was used with pyrolysis of the tyres followed by catalytic reaction. There was only a small difference in the total gas yield and hydrog...

: In this study, Ni and Cu nanowire arrays and Ni/Cu superlattice nanowire arrays are fabricated using standard techniques such as electrochemical deposition of metals into porous anodic alumina oxide templates having pore diameters of about 50 nm. We perform optical measurements on these nanowire array structures. Optical reflectance (OR) of the as-prepared samples is recorded using an imaging...