Abstract: The oil recovery factor from shale oil remains low, about 5 to 7% of the oil in place. How to increase oil recovery from shale oil reservoirs is attracting more and more attention. CO2 huff-and-puff was historically considered one of the best approaches to improve the oil rate. Most previous simulation studies have been based on dual porosity, but simulation results from dual-porosity...

Abstract Hydraulic fracturing and permeability enhancement are effective methods to improve low-permeability coal seams. However, few studies focused on increase permeability, there no suitable prediction for engineering applications. In this work, PFC2D software was used simulate seam hydraulic fracturing. The results were in a coupled mathematical model of the interaction between deformation ...

A method for determining the size of a crack induced by hydraulic fracturing is presented. The procedure is based on the measurement of the crack opening displacement and the fracture mechanics approach. The proposed method has been tested by conducting laboratory small-scale hydraulic fracturing tests on a granite. It is shown from the preliminary tests that the method provides a reasonable pr...

By using the theory of artificial intelligence fault diagnosis of hydraulic excavator of several basic problems are discussed in this paper, the artificial intelligence neural network model is established for the fault diagnosis of hydraulic system; the combined application of fault diagnosis analysis (FTA) and artificial neural network is evaluated. In view of the hydraulic excavator failure s...

One of the most critical capabilities of realistic hydraulic fracture simulation is the prediction of complex (turning, bifurcating, or merging) fracture paths. In most classical models, complex fracture simulation is difficult due to the need for a priori knowledge of propagation path and initiation points and the complexity associated with stress singularities at fracture tips. In this study,...

Fluid flow and tracer transport in a fractured Bot Dry Rock (HDR) geothermal reservoir are modeled using fracture network modeling techniques. The steady state pressure and flow fields are solved for a two-dimensional, interconnected network of fractures with no-flow outer boundaries and constant-pressure source and sink points to simulate wellbore-fracture intersections. The tracer response is...

Hydraulic fracturing was the main technology to achieve economic development of conglomerate reservoirs, knowing that hydraulic fracture propagation mode great significance for improving reservoirs. This paper proposed a new method understand behavior based on hybrid finite-discrete element method. The simulation indicated complex network created near wellbore in studied reservoir, and around g...

The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in enhanced geothermal systems (EGS). Simulating processes resulting in hydraulic fracturing and/or the remobilization of existing fractures, especially the interaction between propagating fractures and existing fractures, represents a c...

Coal bed methane (CBM) is generated primarily through the microbial degradation of coal. Despite a limited understanding of the microorganisms responsible for this process, there is significant interest in developing methods to stimulate additional methane production from CBM wells. Physical techniques including hydraulic fracture stimulation are commonly applied to CBM wells, however the effec...