A gold coated copper rotating electrode was used to eliminate surface oxidation effect. This study examined the effect of electrode rotation on the ozone generation process and showed that an ozonizer with an electrode rotating system might be a possible way to increase ozone-synthesis efficiency. Two new phenomena appeared during experiments with the rotating electrode. First was that ozone co...

A consistently effective transvenous defibrillation system for use in automatic defibrillators could significantly alter the approach to patients at risk of sudden death. Transvenous defibrillation systems that use a right ventricular (RV) electrode only or an RV electrode in combination with a chest patch are relatively inefficient at applying current to the posterolateral left ventricle. An R...

A highly selective electrode for Bromide ion based on aza pyrilium derivative as an excellentionophore is described.The sensor exhibits a good linear response with a slope of ( 60±1 ) mV per decadeover the concentration range of ( 1×10-3 – 9×10-6 M ) , and a detection limit of ( 3×10-6 M ) of Bromideions .The electrode response is independent of pH in the range of(4.0 –9.5).Selectivity coeffici...

the electrocatalytic oxidation of captopril (cap) was studied by modified carbon nanotubes paste electrode in the presence of isoproterenol (ispt) using cyclic voltammetry (cv), chronoamperometry and square wave voltammetry (swv). also, the values of catalytic rate constant (k), and electron transfer coefficient (α) for cap were calculated. the mechanism of ca electrochemical behavior at the mo...

polypyrrole (ppy) nanofibers have been fabricated on glassy carbon electrode (gce) usingelectrochemical technique. electropolymerization of pyrrole (py) for the fabrication of ppy nanofiberswas occurred on gce by applying a fixed potential of about 0.85 v for 120 sec in a mild basic solutioncontaining sodium carbonate and sodium perchlorate. in the mild basic media, the monomer, py, isoxidized ...

copper nanoparticles were fabricated by electro-reduction of cuso4solution in the presence of cetyltrimethylammonium bromide (ctab) cationic surfactant as an additive through potentiostatic method. the prepared copper nanoparticles were characterized by scanning electron microscopy (sem) and electrochemical methods. the sem images reveal that the nanoparticles with diameters at about 70 n...

in this research, an enzyme modified electrode has been produced during the electropolymerization of aniline through incorporation of sulfite oxidase into a conducting polymer. then the bioelectrochemical response of resulted sulfite biosensor was investigated at different experimental conditions. study of  the stability of the resulted sulfite biosensor revealed that formation of a passive fil...

BACKGROUND Monitoring of electrode resistance during tDCS is considered important for tolerability and safety. Conventional resistance measurement methods do not isolate individual electrode resistance and for HD-tDCS devices, cross talk across electrodes makes concurrent resistance monitoring unreliable. OBJECTIVE We propose a novel method to monitor individual electrode resistance during tD...

The reliability of different electrode admittance equations in the case of the Ag/Ag I electrode is critically discussed. It is shown that the admittance equation already derived for the' metal arnalgam/metal-Ion reversible electrode reaction coupled with reactant adsorption offers some advantages compared to the admittance equation for the reversible electrode reaction on the metal/metal-ion e...

A carbon Paste electrode modified with cobalt (II) phthalocyanine (CoPC) was used as a sensitive potentiometric sensor for determination of ascorbic acid in aqueous solutions. The potential response of the electrode is a linear function of ascorbic acid concentration over the range 5 10 to 10 M (?1- 1800 µg ML ) with a Nernstian slope of 56 mV at pH 7. The limit of detection was 0.2 µg ...