in this research, b4c-ni cermet coating was sprayed on the surface of 4130 steel from b4c and ni feed-stockpowders using high velocity oxy-fuel (hvof) method. in order to characterize the tribological behavior of thecoating, ball on disk wear tests were done at the ambient temperature and under the loads of 1, 3 and 5 n.phase analysis of the coating after spraying was studied by x-ray diffracto...

a new model based on a combination of the polymeric multigrain and multilayer models has been developed to predict the polymerization rate, particle growth, morphology, effective parameters on broadening of the molecular weight distribution, number and weight average of the molecular weight, isotacticity index and bulk density of polymer. mathematical correlations and the kinetics used in this ...

this study is concerned with the synthesizing of cu-zn nano-ferrite particles in the laboratory applying simple techniques. the morphology of the synthesized nano-particles was analyzed using transmission electron microscopy (tem), and the minerals were identified using x-ray diffraction (xrd). the nano material was used to replace 1- 4 percent by weight of portland cement in cement pastes and ...

india has large resources of natural fibres such as banana, khus, sisal, korai grass,talipot, palm leaf, coconut, pineapple, screwpine, golden grass, jute and sabaiamong others. in the past, trade of the village folk depended on harvesting fibresgrown in their villages. natural fibers have recently gaining attraction of researchersdue to their low cost eco-friendly and biodegradability characte...

in this paper, an ultra low carbon high strength low alloy grade steel was subjected to a two-step forging processand this was followed by different post cooling methods. the highest strength was obtained at a faster coolingrate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides andcarbonitrides. at a slow cooling rate, the strength fel...

Spark plasma sintering has been used for the first time to prepare the ASTM F75 cobalt-chromium-molybdenum (Co-Cr-Mo) orthopaedic alloy composition using nanopowders. In the preliminary work presented in this report, the effect of processing variables on the structural features of the alloy (phases present, grain size and microstructure) has been investigated. Specimens of greater than 99.5 per...

We illustrate the flow behaviour of fluids with isotropic and anisotropic microstructure (internal length, layering with bending stiffness) by means of numerical simulations of silo discharge and flow alignment in simple shear. The Cosserat theory is used to provide an internal length in the constitutive model through bending stiffness to describe isotropic microstructure and this theory is cou...

The mechanical properties of freestanding electroplated Cu films were determined by measuring the deflection of Si-framed, pressurized membranes. The films were deformed under plane-strain conditions. The pressure-deflection data are converted into stress-strain curves by means of simple analytical formulae. The microstructure of the Cu films was characterized using scanning electron microscopy...

In the present investigation, H13 tool steel has been deposited on copper alloy substrate using both CO2 and diode laser. A detailed parametric analysis has been carried out in order to find out optimum processing zone for coating defect free H13 tool steel on copper alloy substrate. Followed by parametric optimization, the microstructure and microhardness of the deposited clads have been evalu...

The aim of this paper is to present the advantages of using Digital Image Correlation (DIC) and Infrared Thermography (IRT) to investigate the thermomechanical behavior of aluminum at the scale of its microstructure. The study combines these complementary imaging techniques: Electron Backscatter Diffraction (EBSD) to characterise the microstructure of the sample, DIC to obtain strain fields and...