Non-native aquatic species can be introduced in new areas through emptying of the ballast tanks, with a high impact on health, economy and environment. This is considered by the International Maritime Organization (IMO): (i) in 2004, the IMO adopted the International Convention for the Control and Management of Ships' Ballast Water and Sediments (BMW Convention) in orde...

removing of ions from different water and waste water is one of the most important of nanofiltration potential for different aims, such as softening of potable water, remove of heavy metal ions and purification of waste water to reuse. in this study nanofiltration was used to remove of the most important ions (na+, k+, ca2+, mg2+, so42-, cl-) in sugar beet press water to reuse of this stream. e...

Dielectric interface would be formed on the electrode surface during the analysis or disposal of many phenolic compounds due to electro-polymerization. This could cause electrode passivation, also called electrode fouling, which is indicated by the continuously decaying current signal. This paper proposed a model based on the potential drop across the fouling layer, which is helpful for deep un...

fouling is one of the main parameters in design of any exchanger. ignoring this parameter causes problems such as overheating or under- heating of process streams. in this article a heat exchanger network was designed using process streams data in cdu of tehran refinery. then using tema fouling factors, network exchangers were designed and area and cost were estimated. by changing fouling facto...

One of the key issues in membrane technology is to avoid fouling which is formed on the membrane surface. To get over this trouble, the use of a patterned surface was suggested as a way to reduce fouling. In this report, both the experimental and numerical studies were performed with a prism patterned membrane system. In our experiments, we observe the local distribution of microbials; more fou...

In this study, the ultrafiltration membrane for humic substance removal was prepared by blending polysulfone with a high concentration of PEG400 as additives. The influences of the additive to the fouling resistance capability and humic substances rejection of the polysulfone membrane were investigated. The addition of 35%wt of PEG400 concentration improved the pure water flux up to 200, but re...