This research presents adsorption potential of surfactant (sodium dodecyl sulphate; SDS) coated magnetite nanoparticles as suitable and efficient adsorbent for the removal of Basic Blue 41 (BB 41), as a cationic dye from textile’s company wastewater. The effects of various experimental parameters (e.g. initial pH of the solution, SDS amount, and ionic strength) on the adsorption efficiency of B...

in this study adsorption of 1-chloro-4-nitrobenzene on single walled carbon nanotubes has been investigated.  the effect of contact time, ph, initial concentration of 1-chloro-4-nitrobenzene, adsorbent dosage and temperature on its adsorption has been carried out in order to find optimum adsorption conditions. adsorption isotherms and related constants were also determined. results showed that ...

ABSTRACT: Excess fluoride ion (F) in drinking water causes harmful effects such as dental and skeletal fluorosis. Hence, its concentration in drinking water must not exceed a certain range. This study investigated the removal of F from aqueous solutions with CuO nanoparticles using a range of experimental approaches, including pH, adsorbent dose, contact times, and initial F concentration. The ...

Polyaniline titanotungstate (PATiW) was synthesized by the sol-gel method. Adsorption isotherm studies of Cs from aqueous solution are described. Elemental Composition, chemical solubility, ion-exchange capacity (IEC) and pH titration are studied. Distribution coefficients (Kd) for ten metal ions have been determined. It was found that the polyaniline titanotungstate has high affinity and high ...

A Moroccan bentonite was activated by sodium carbonate (Na–Be), and a combined chemical thermal activation (Na–Be450). The materials characterization performed XRD, EDS, FTIR, SEM porosity measurements. efficiency of Na–Be Na–Be450 as low-cost adsorbents to remove nickel silver from aqueous solution checked. Langmuir, Freundlich Langmuir-Freundlich models were used for the analysis equilibrium ...

a chelating resin is prepared by condensation polymerization of aniline with formaldehyde andcharacterized by ft-ir, elemental analysis and studied for the preconcentration and determination of traceplatinum ion from environmental water sample using inductively coupled plasma-atomic emission spectroscopy(icp-aes). the optimum ph value for sorption of the metal ions was 5. the maximum adsorption...

Polyaniline/cerium oxide (PANI/CeO2) composites were prepared and characterized by XRD, FT-IR, nitrogen adsorption/desorption isotherms and TEM techniques. The PANI/CeO2 composites were used for removal of Remazol Red (RB-133) from aqueous solution. The adsorption behaviour of dye was studied at different experimental conditions of solution pH and reaction temperature. The adsorption isotherm s...

Introduction: Colored compounds which often are toxic and carcinogen is one of the environmental pollutants. These pollutants should be removed prior than discharge to the environment. The aim of this study was the evaluation of maize tassel powder efficiency for the removal of Reactive Red 198 dye from synthetic textile wastewater. Materials & Methods: This experimental study was performed in...

conclusions according to achieved results, it was defined that swcnts is a quite effective adsorbent in removal of 2, 4-d from aqueous environments. results maximum adsorption capacity of the swcnts was 979.6 mg/g at ph5, contact time 45 min, initial concentration of 5000 µg/l, and 23 ± 2 ◦c temperatures, when 97.96% of 2, 4-d herbicide were removed. the adsorption equilibriums were analyzed by...