Roll-to-roll (R2R) printing has been pursued as a commercially viable high-throughput technology to manufacture flexible, disposable, and inexpensive printed electronic devices. However, in recent years, pessimism has prevailed because of the barriers faced when attempting to fabricate and integrate thin film transistors (TFTs) using an R2R printing method. In this paper, we report 20 × 20 acti...

The target was to study and develop industrially suitable methods to apply thermoplastic coatings on plywood. Typically, wear and climatic resistance for wooden sheets, such as chip board and plywood, is achieved by thermosetting resin coating (e.g. phenolformaldehyde). However, economical and environmental issues are driving towards thermoplastic coatings (e.g. polyethylene) in such products. ...

A new microfabrication process based on a xerographic process is described. A laser printer is used to selectively deposit toner on a polyester film, which is subsequently laminated against another polyester film. The toner layer binds the two polyester films and allows the blank regions to become channels for microfluidics. These software-outlined channels are approximately 6 microm deep. Appr...

Up to this moment, there is no guideline regarding the materials produce mouthguards. The most used Ethylene-Vinyl Acetate (EVA). Studies indicate that laminating EVA sheets with rigid components could increase protection capacities of mouthguards whereas other studies suggest only replacement material within it structure can energy absorption. aim work evaluate impact response four different f...

Abstract Piezoelectric nanogenerators (PENGs) that can harvest mechanical energy from ambient environment have broad prospects for multi-functional applications. Here, multi-layered piezoelectric composites with a porous structure based on highly oriented Pb(Zr 0.52 Ti 0.48 )O 3 /PVDF (PZT/PVDF) electrospinning fibers are prepared via laminating method to construct high-performance PENGs. PZT p...

Due to the energy transition and growth of electromobility, demand for lithium-ion batteries has increased in recent years. Great demands are being placed on quality battery cells their electrochemical properties. Therefore, understanding interactions between products processes implementation management measures essential factors that requires inline capable process monitoring. In cell laminati...

In this paper, the rheological behaviour of a petroleum-based epoxy (EL2 laminating epoxy) was compared with Super Sap CLR clear bio-resin epoxy. The focus work on viscous and viscoelastic performance these resins. Rheological tests were carried out at 15, 30, 60 min after mixing pure epoxies hardeners constant temperature 25 °C. results obtained from rheometer showed that viscosity both system...

In this study, bending and compression strength tests were performed to investigate effect of composition layer layout Larix cross-laminated timber (CLT) on mechanical properties. The CLT consists five laminae, specimens classified into four types according grade layer. layer’s composited as follows 1) cross-laminating layers in major minor direction (Type A), 2) external internal applied B). E...