Nanocomposite Nb-C coatings, with a C/Nb ratio of 0.93 1.59, have been deposited by reactive sputtering in a commercial sputtering system where the C is supplied from an acetylene gas at deposition rates of up to 200 nm/min. The coatings are compared to nonreactively sputtered Nb-C coatings deposited from Nb and C targets in lab-scale equipment at deposition rates two orders of magnitude lower....

The objective of this study was to characterize the physicochemical, dissolution, and osteogenic properties of radio frequency magnetron sputtered dicalcium pyrophosphate/tricalciumphosphate (Pyro/TCP) and hydroxylapatite (HA) coatings. Therefore Pyro/TCP and HA coatings were deposited on grit-blasted titanium discs. The results showed that the deposited coatings were amorphous and changed into...

In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...

Cr-Nb-Al-N coatings with Al content from 0 to 12 at.% were deposited by d.c. reactive magnetron sputtering. The coatings were annealed in protective atmosphere at 800 and 900 o C for 1h and exposed to air at 800, 900 and 1200 o C for different times. The chemical composition, structure, microstructure, hardness and adhesive/cohesive strength of the coatings, in as-deposited and annealed conditi...

as an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. corrosion resistance was studied in 3.5 wt.% nacl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...

Ceramic coatings with high emissivity were fabricated on TC4 alloys by micro-arc oxidation technique (MAO) in mixed silicate and phosphate electrolytes with varying KMnO₄ addition. The microstructure, phase and chemical composition were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), and the infrared emissivity of the MAO...

Corrosion behavior of Ni20Cr coatings deposited by HVOF (high velocity oxygen-fuel) process was evaluated in ZnCl2-KCl (1 : 1 mole ratio) molten salts. Electrochemical techniques employed were potentiodynamic polarization curves, open circuit potential, and linear polarization resistance (LPR) measurements. Experimental conditions included static air and temperatures of 350, 400, and 450°C. 304...

In industrial applications, most materials are exposed to wear and friction because multiple conditions are used. However, the tribological properties of these materials can be improved with different techniques. One such technique that improves the frictional property of a surface is the use of self-lubricating coatings. In this study, multicomponent coatings of nominal composition Cu-Ni3Al-Mo...