Kraft pulp produced from juvenile and mature wood from thirty-two-yearold Corymbia citriodora trees was evaluated. The stem was subdivided into regions of juvenile and mature wood, and then it was transformed into chips. These materials were then cooked in the Laboratory of Pulp and Paper at São Paulo State University (UNESP, Botucatu, SP, Brazil) and the physico-mechanical properties of the pu...

Children in the warm rain forest are at risk of having their lung function compromised by a variety of factors, including smoke from wood fires. A total of 358 children from a fishing port and 400 children living in a farm settlement were tested to determine their peak expiratory flow rate (PEFR), forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC), forced expiratory volume in 1...

address to increasing demand for wood products and limited domestic resources, wood and wood products imports as one of the easily available and widespread ways in international context, is very important. among the policy on the imported wood market that is evident, apply a tariff and non-tariff barriers. know the reaction importers against the change priced is important to be determined and a...

One of the most important needs of pedestrians is safety at crossing points, especially at intersections. Intersections are important parts of the urban road network because any disruption in them reduces the capacity of the entire network. The main objective of this research is to propose an appropriate method for prioritizing urban intersections with considering the important factors affectin...

The dimensional variations of green wood samples induced by organic solvents have been studied. The solvents used (ethanol, isopropanol, acetone, and acetonitrile) covered a wide range of polarity and were studied pure and in aqueous solutions over a wide range of concentrations. Samples of normal and tension wood of poplar were used in order to minimize the effect of hydrophobic extractives on...

Bolts cut from 11-year-old loblolly pines (Pinus taeda L.) were measured to determine the effects of applications of fertilizer and competition control treatments on the amount of pine bark produced. Bark thickness at breast height was not significantly affected by any of the treatments. Regression analysis showed that the dry weight of bark per unit surface area of the bolt increased as the vo...

Rheological behavior of high-density polyethylene (HDPE)-wood flour composites with different wood contents was examined using steady shear sweep, oscillatory frequency sweep, creep test, and stress relaxation test. The samples were prepared using a melt compounding method in a twin-screw extruder. The results showed that the yield stress did not appear for the composites prepared under the pro...

the possibility of using water insoluble fraction from biomass pyrolysis oil as additive in synthesis of wood-plastic novolac has been proved by using differential scanning calorimetry (dsc) and fourier transformed infra red (ft-ir) spectroscopy. synthesis of novolac with different concentrations (10, 20 and 30 wt %) of water insoluble fraction were performed. it was found that mechanical prope...

in this research, the effect of tension wood formation in populus nigra on its anatomical characteristics was studied. vessel element and ray frequency (n/mm²), vessel diameter and ray dimensions were measured in both normal and tension wood. furthermore, the formation of gelatinous layer (g-layer) in the fibers of tension wood was studied. the results showed that the vessel proportion and diam...