The results of a theoretical and experimental study the processes ignition combustion single composite liquid fuel (CLF) droplet based on wet coal processing waste combustible municipal solid under radiant convective heating are presented. Based detailed analysis video recordings previously obtained data from CLF droplet, mathematical model was developed. advantage developed lies in specificati...

This paper reports a modelling work on the existing experimental data of single coal particles combustion process [1,2]. Two kinds of coal particles (a high-volatile bituminous coal / a lignite coal) are injected in a drop-tube furnace, ignited and burned in quiescent O2/N2 and O2/CO2 atmospheres with oxygen mole fraction varying from 20% to 100%. Ignition delay time, particle life time and par...

Fuel blending is a widely used approach in biomass combustion, particularly for feedstocks with low calorific value and high moisture content. In on-site sanitation technologies, fuel blending is proposed as a pre-treatment requirement to reduce moisture levels and improve the physiochemical properties of raw faeces prior to drying. This study investigates the co-combustion performance of wood ...

The use of nonequilibrium plasma generated by nanosecond discharges to ignite fuel/air mixtures, known as transient plasma ignition (TPI), has been shown to effectively reduce ignition delay and improve engine performance relative to spark ignition for combustion engines. While this method is potentially useful for many engine applications, at present the underlying physics are poorly understoo...

In this study, a 3D combustion chamber was simulated using FLUENT 6.32. Aim to obtain detailed information on combustion characteristics and _ nitrogen oxides in the furnace and the effect of oxygen enrichment in a combustion process. Oxygenenriched combustion is an effective way to reduce emissions. This paper analyzes NO emission, including thermal NO and prompt NO. Flow rate ratio of air to ...

The purpose of this paper is to investigate combustion characteristics for rotary engine via numerical studies. A 3D numerical model was developed to study the influence of several operative parameters on combustion characteristics. A novel rotary engine called, “Leaf Spring Rotary Engine”, was used to illustrate the structure and principle of the engine. The aims are to (1) improve the underst...

The objective of this work was to investigate the influence of preferential diffusion on flame structure and propagation of lean-premixed hydrogen-carbon monoxide syngas-air flame at elevated pressure using direct numerical simulation (DNS) and detailed chemistry. The physical problem investigated is lean-premixed H2/CO outwardly propagating turbulent spherical flame at constant pressure of 4ba...

A novel method for real-time moisture level monitoring of the solid biomass fuel in grate combustion is presented. The measurement principle is based on temperature sensor information from both flame and a fuel bed. Based on the combustion theory and data analysis, selected features have been extracted from the fused sensor information and estimate of the fuel quality is then made continuously ...

in this paper, the effects of input temperature and compression ratio on the net output work and efficiency of the air standard cycles, i.e. atkinson cycle, diesel cycle and otto cycle are analyzed. we assumed that the compression and power processes are adiabatic and reversible and any convective, conductive and radiative heat transfer to cylinder wall during the heat rejection process may be ...