This report contains the results of attempting to improve on the results of Scott R. Sawyer and Alan M. L’Esperance research paper “Investigation of Paraffin Wax as an Energy Storage Medium Within a Shell-and-Tube Heat Exchanger.” The overall goal of the paper mentioned was to investigate the usefulness of wax as an energy storage medium. Scott R. Sawyer and Alan M. L’Esperance determined that ...

the present study investigated the effect of distilled-water/ silver nanofluid on heat transfer in a closed cooling system of one of the electrical energy generation units at isfahan power plant. the difference between this study and previous researches refers to silver properties which have a high thermal conductivity and is non-toxic, hydrophilic and eco-friendly. distilled water/ silver nano...

background and objectives: thermal processing is an effective method in preventing microbial spoilage but high heat transfer in a long time process that leads to quality loss and increased energy consumption. also it is important to consider sensitive nature of food products during the thermal processing. due to the nano-fluids' unique thermo–physical properties compared with the conventio...

pinch technology is one of the best methods for designing a multi stream heat exchanger(mshe) through a network; current pinch-based methods, however, lead to a larger and more complicateddesign problems. the major drawback of the current methods is they result in designs having more individual mshe sections than essential, correspond to the enthalpy intervals on temperature vs. enthalpy diagra...

Heat exchanger networks present an interesting control problem due to coupling among process streams. In this work, the linear quadratic regulator (LQR), a feedback optimal control technique, is used to control stream temperatures on a laboratory scale heat exchanger network, through bypass manipulation, in a multivariable system. The LQR design was based on a mathematical model of the plant an...

We have developed a novel procedure for constructing high surface area silver sinter heat exchangers. Our recipe incorporates nylon fibers having a diameter of ∼ 50 μm and thin wires of bulk silver in the heat exchanger. In order to increase the thermal conductance of liquid helium within the heat exchanger, prior to sintering, the nylon fibers are dissolved with an organic acid leaving a netwo...

Heat exchanger system is widely used in chemical plants because it can sustain wide range of temperature and pressure. The main purpose of a heat exchanger system is to transfer heat from a hot fluid to a cooler fluid, so temperature control of outlet fluid is of prime importance. To control the temperature of outlet fluid of the heat exchanger system a conventional PID controller can be used. ...

This work presents an experimental approach to study the refrigerant flow through capillary tube-suction line heat exchangers. Lateral heat exchanger performance with refrigerant HFC-134a was experimentally evaluated for a range of heat exchanger assemblies and operating conditions typically found in household refrigerators and freezers. Based on the resulting performance data base, the influen...

Recently, there have been many studies on dehumidifiers with a low flow rate of liquid desiccant, in which a plate-type heat exchanger with internal cooling is adopted. If the low flow rate of a liquid desiccant maintains a thin liquid film on the heat exchanger surface, heat and mass transfer performance would improve, the stability of the liquid film would increase, and there would be no entr...

An important feature of heat exchanger network design is the energy-capital tradeoff. This tradeoff has been regarded as complex due to the number of structural network alternatives usually available, each being subject to continuous optimization. Current procedures tend to first identify minimum energy networks. The total cost (capital and energy) can then be improved by evolution and continuo...